I used the information in this post to route a Lowrance 3-in-1 transducer cable up the slot and through boat mounting bracket of an Ultrex. It's a little tight, but it worked and it's as slick as...
Type: Posts; User: Snag_Devil
I used the information in this post to route a Lowrance 3-in-1 transducer cable up the slot and through boat mounting bracket of an Ultrex. It's a little tight, but it worked and it's as slick as...
I have an iPad at the bow and another at the helm. Both my iPads are older models.
The good - the app works well, you can control the settings, it doubles your screen real estate, and you can run...
I park next to a nicer rig.
I can confirm that. The only way to get that grip is to contact Rob at Big Bear.
That's a good thought DaveBrabec. I might see if I can find something that lines up. I like expensive reels, especially spinning, so jamming something metal in the spool makes me hesitate a bit....
I tried some Tatsu 6lb fluoro on a spinning reel and had terrible time with line twist. Then a buddy of mine asked me how I spooled it up and I realized it was not the fault of the line. I'd imagine...
The Auto Tether is a must have for me. It let's me move about the boat while the old two stroke warms up or when I let one of my kids drive (low speed only) and beats the alternative of disconnecting...
I have two HDS7s, one at the console and one at the bow. Both are networked.
I also have a couple of old iPads (like gen 1 and 2 iPad old). I put them in water proof cases and glued ball mounts to...
So a few years ago I had an experience that demonstrated that the reel is an important part of sensitivity. We were drift fishing for steelhead where sensitivity is critical.
I fished a few...
It's dash mountable. You may need to designate a longer wire when you order. I've been quite happy with mine.
Scott's right, that's a good solution, but out of warranty or not, I'd contact the company. Slivers from a rod blank are a likely manufacturing defect - unless they are a result of an impact. If it's...
I like them as a co-angler, and I've drilled holes in them and mounted them on my multi species boat. I'm not thrilled with the straps being held by screws and not bolts, but I've only had to replace...
Still available. Might try Ahlstrandmarine.com. That is where I got mine. You'll need the number on your key.
...
Well crap. According to 316jughead (who I have no reason to doubt) maybe my problem isn't solved. I'll find out this weekend when I go out again.
To clarify, I know zilch about outboards. I was...
I was incorrect that the gauges died. I was able to repeat the issue and the gauges stayed live.
So if anyone else has this issue, it appears to have been a bad fuel bulb. Air was getting introduced into the fuel line, creating a void, and starving the motor.
Jon
All my rods are spiral wrapped. I've tested this numerous times by taking two identical blanks and building one spiral and one conventional. I found that the spiral casted better, had less weight at...
It's a beautiful Saturday morning on the Columbia River, high clouds, water has just a touch of ripple, and I'm cruising downstream at 47 mph or so with a plan to catch the winning bag of smallies....
Carbon fiber...
I'd make sure you can put in a recessed TM tray without needing additional bracing after the fact.
http://www.bbcboards.net/attachment.php?attachmentid=317501&stc=1
Not easy, but doable.
Has anyone installed a comforTroll U in an older Lund ProV (1996ish)? My dealer is telling me it won't fit without cutting into the seat support and the Lund Engineer says it should fit but not to...
I have an 96 Lund 1890 Pro V and I recently went through the research you're now doing. I ended up getting a schematic from Lund and their advice for the best location. I probably could have done it...
1996 Lund Pro V 1890
175 HP Johnson Fast Strike
Ultrex TM
HDS 7 on bow and console
http://www.bbcboards.net/attachment.php?attachmentid=307153&stc=1
...
Your gear is only as good as your weakest link in the chain. The rod, reel, line, and terminal tackle all make a difference in sensitivity.
A few years ago I was fishing with a Steelhead guy who...