Search:

I think I found the answer to my question. I didn't realize swivl eze made a snap lock post, found one on amazon

I have a 2011 522 . The bow butt seat pedestal has failed on me three times since 2014. ( Won't stay in the up position, I have adjusted etc several times) Seems like I should get more usage. I...

Tested the amps on the wire to the live scope transducer. Max wa just under 3 amps. Battery is 23 amp hours. So it should last 7 plus hours. Next time out will do more testing with a larger bait. ...

Disconnected the lithium batter and graphs stayed on. But lost panoptix. I am getting a meter to test the amperage. But I am shifting back to the battery is big enough for just Panoptix transducer....

They battery is 23AH so how long should it hold power? I have two 93sv up front and 2 at the console.. it may be that I am drawing 6-8 amp??

I may need to un plug that single battery and confirm...

I have 93sv units with a dedicated lithium battery to power livescope. It seems that when the voltage drops I can't pick up the lure and also see less fish etc. I noticed it at 11.4 volts.

I...

I bought a cable and hooked up to engine, and to the back of the chartplotter/ fish finder I can't seem to get to the engine hours etc..

Is it possible with the 93sv? Have not fished it through...

Any hope they make an update available for my unit? They are a few years old but not ancient. Surely it’s not that different than the ultras? Yes have the UHD. black box?

or so I need to just...

2.57

I have the 93sv plus with the high def black box... will it update with the color limit ?

replaced the hose. wasn't the issue.. put a screw driver across the relay and it lifted.... must be bad relay

Found a leak in the hose fitting... it is broken. Maybe that will help Will keep board posted

Thanks

Grant

I have a 2011 Ranger 522 with Bob's machine jackplate. It will lower but cannot get it to raise. I hear the solenoid click. But motor does not seem to run.

It was very low on hydraulic...

I have two 92sv units at the drivers seat. One of the units does not show the correct depth number in the corner but does show correct depth on the screen. This must be a setting that I have...

Should have checked before posting... but battery cable nut was barely hand tight... wonder it worked at all... thanks for the help

I am calling the main switch a switch in the battery compartment that I switch off and on each trip. It must be on for electrical power to come to the boat. I also have a switch for the trolling...

Three times recently I have hit a big wave... and lost all electrical power to the boat. Motor dies... graphs go off... I can then hit 1,2,3,4 to then start and it works just fine.

Where should I...

I have the ultra HD box already. Could i buy the livescope transducer with out another black box?

Amy help is welcomed.

Thanks

Out twice and it acted like bad battery. Cranked it up fine but leaving second spot it wouldn't crank. Solenoid would not engage. Jumped my It off.

Next stop could not get it to crank. Jumping...

Thanks that is very helpful..... when I spoke to the help line person... they said I was out of luck...

I reconnected the wires, but have not got it too work yet... Any advice is welcome...

Blew the fuse to Panoptix. Replaced it. Now when I power up it doesn't show Panoptix as an option.

Probably soemthing simple. How do i get it to recognize the Panoptix transducer.

Did the...

l

Cable got cut on my Panoptix. Rewired.

But it does not recognize the transducer.

Thinking ot
may have blown a fuse ?

thanks for any help