Progressively getting worse- I bought a 225 Pro XS with just under 500 hrs ('07). Compression 115-118 all 6. New plugs, New SEI gearcase. Runs great on the hose or in Neutral in the water. Still...
Type: Posts; User: silvertalon
Progressively getting worse- I bought a 225 Pro XS with just under 500 hrs ('07). Compression 115-118 all 6. New plugs, New SEI gearcase. Runs great on the hose or in Neutral in the water. Still...
Disregard post. I found that C-MAP is independent of Lowrance and has a great website. And they do offer some state by-state maps. I don't see TN tho. Thanks.
So I bought a Lowrance Ti 2 12" about 6 months ago and love it. I've been wanting to get C-MAP for color shading but when I look for it on Lowrance website all I can find is salt water regions....
Thanks for the input, I think I found the issue. 1st, tried to get the copper crush washer out of the seat bore. It is factory washer. Stuck forever. Tried to grab it with a thread extractor. won't...
Saw the copper washer when i changed out the seat. couldnt pop it out, left it in. maybe fuel is leaking past it. Don't know how else fuel could be getting out of the bowl. It leaked a tiny bit after...
Venturi, pouring out carb throat.
Side bowl carbs- Having flooding issues with the center carb leaking out fuel when priming the bulb. Tried a new inlet needle and seat, 2 new floats, adjustment tabs are set to the manual specs. Then...
Needing to know- Will the wireless system / frequency, in the Ti2 series work / communicate with FS, HDS, Carbon, HDS Live (any wireless Lowrance), ? Also, will my 6 yr old Navionics Platinum chip...
Thanks for the response. Waypoint sharing is my main concern. I assume the Elite then will need it's own navionics card? Eventually I'll get another E9 to replace the other gen 2 non-touch and will...
I have a dual HDS Gen 11 system with S scan module, Point One and NEMA 2000 etc. I had a bow mount HDS go out and want to replace it with a 9" Elite Ti2. Will it network in place of the failed bow...
Can I download waypoint data to chipcard from hds gen 2 unit then upload the data into a new Elite Ti2 unit? Thanks.
Anyone know if the uvs12 livescope xdcr will work with the UHD93vs? Thanks...
Will the quickdraw feature for custom mapping work on any body of water? I saw a vid that seemed to explain it only works on bodies of water that do not have current cartogrophy. I'm guessing it...
It's probably an upgrade for 'Liveview'- software and maybe xdcr change?. Cone width etc? It'd need to give competitive results to have any worth. imo.
Thanks, So, I might get 2- 93sv's. I found out that The Garmin will use the point one antenna? I just plug in a cable and extention from the garmin helm unit into the nema lowrance point one and...
So, I'd just patch into my current nema starter kit with terminal kits and plug cables into the new 93's? Thanks for the reply.
I'm currently running 2 HDS GEn 2's (7 yrs old), and using Navionics Platinum. Their mapping is linked via NEMA 2000. If I install a new Ti2 touch, ill it link into the nema network and share...
I am currently running 2 Lowrance HDS Gen 2's bow and helm units for 7 yrs. and use the Point One antenna for speed and accuracy in marking waypoints etc. Are the internal antenna's in the 93SV's...
I've also heard of issues with the Pro XS 4S's. Loss of top end and smoking. I haven't been able to verify this but it comes from a good source. So far, Merc's answer/fix, is to prop down to get the...
Something you can try- Duplicate the problem when you load out on the trailer. When it is chugging smoke turn the key off, trailer it home and pull the spark plugs. Look for an oily plug or two. If...
It's common for more than a few ounces of oil to settle at the bottom of the intake plenum. The gasket could have a small leak. Or one of the seven oil feed lines from the pump could be leaking at...
Don't forget a high perf exhaust tuner. It is a key ingredient in a phase 1 hop-up. I would just shave the heads and CC them. You'll also be committing to 93 octane fuel. I went thru all of this with...
ECM programming and porting. Ports are cut lower as HP goes up to allow for more fuel/air in and more exh out.
OH Sensor is toward the top pf the cylinder block cover - rear of engine. Tan or Tan/Blue wire. You can also trace it to the lower Starboard side where it will junction with the oil sensor and module...
Mercury Marine has always recommended mid-grade octane fuel 89-91 or higher. It's hard to find 91 anymore. At least in the Chattanooga area. Minimum rec'd octane is 87. And non-ethanol whenever...