I have a 96 209 TE,Just bought a 12" Bobs Action jackplate and well... the bolt holes don't line up. Anyone have any ideas on what to do with this thing? If I drill the proper spacing out there is...
Type: Posts; User: strat250
I have a 96 209 TE,Just bought a 12" Bobs Action jackplate and well... the bolt holes don't line up. Anyone have any ideas on what to do with this thing? If I drill the proper spacing out there is...
Does anyone know what fuel sending unit I should buy to replace my sending unit? It’s a 1997
80? Nope sorry man, not gonna happen. Do the math backwards. Figure our max rpm’s you would want to run on your engine, get the gear ratio of the lower unit, use 12 for a slip number and plug it into...
Gotta find out the pitch of the prop. That will be the indicator but to me that sounds a bit fast with a 200
Picked up a 27 tempest and a 27 trophy, will be running it this weekend, will report back with the numbers.
Think a 27 tempest plus or too much?
It was a very tight fit but the two of them did fit and I am able to control the flow rate of each individually. I don’t recall how I did the wiring to be honest but I do recall it was pretty easy....
I replaced mine with two of these. https://www.amazon.ca/gp/aw/d/B000FP1QT4?psc=1&ref=yo_pop_mb_pd
works great and I like being able to better customize the flow rates.
Ok so I was running a 2002 evinrude 225 HO and was spinning a 28 pitch 3 blade at 5900 rpm and 2” below the pad.. that motor blew up so now I have a 2002 225 efi merc... and no props. Have the cmc...
It’s a single tank unit. Not sure what the shape is though. I know that the access panel is behind the seats as I re did my seats in the fall and I had to drain the tank.... don’t ask.... damn...
Awesome thanks. Do you know where the fitting is for the water?
Ok
Anything I should be looking for in particular? Never took it out.
I’m in canada
serial number is ot467622
i ended up find getting a deal on those controls I posted. Also found out the smartcraft controls were the dts controls. Also I found out after I tried to...
Sorry got lots of questions.
2002 225 efi serial 0T467622
lol
i was wondering about the oil tanks... the one in the boat.
I was originally going to just block off the injection and I have the...
Serial num 0T467622, 2002 efi 225
just trying to decide between running a normal tach and water pressure gauge or smartcraft.
I just rigged up the motor, switched from a 2002 evinrude 225.
What...
I found a PDF download for one yesterday will post the link later when I get to work.
The fuel doesn’t register until it’s at about half a tank, when it’s filled the gauge reads full. Any thoughts on why from empty to half a tank it shows 0 on the gauge. But still reads full when it’s...
On great lakes skip website I saw a 4000 and. 4000 called smartcraft. The one labelled smartcraft I think is the dts unit? Sorry this smartcraft thing has me confused. The smartcraft engine...
Sorry about that. I will add it as soon as I can. The motor is currently in the back of my truck I just bought it and won’t be able to flip it over til tomorrow.
Do you know or can you tell if this...
This is a 20” 2002 efi but it’s the blue motor I believe saltwater? If it’s a smart craft opti Bed motor does it need smart craft controls versus normal ones?
Ok cool thanks, sorry for noob questions this is my first merc, always yam or rude before.
My motor has a smartcraft sticker on it and I saw there are a different set of controls that ware listed...
Does anyone know if a 4000 gen 2 control will work with a 2002 225 efi? As I understand I will need a separate gen1 throttle cable for the hot foot but I’m talkin about the ignition and shifter...
Anyone know where I can get Keys for the lids? I tried to go to a store to get keys cut but they tried and they don't have blanks the same.
Hey can I change my name on here?