Search:

Seastar Throttle Control Cable 14 feet long. 600A for Mercury Outboard. Ordered this for my Z21 so I could put a hot foot in, but it was 1 foot to short. Dealer wouldn't take it back. New...

I have a TR19 with an Evinrude 150 HO on it with a raker 22 pitch prop. It turns 6000 rpm wot. When I'm out guiding and happen to have two extra big guys in the boat (275+each) full tank of gas I...

I have a 2005 Z21. The top of the starboard gas tank has a 1" cracks at the top. Is there some kind of marine gas tank epoxy that I can use or is there anybody can suggest a repair without...

I have to do this to my boat and reseal the seam. I don't understand, are you sliding the tube through the channel or are you pushing it into the channel?

Just wondering, where do you find 3M 4200?

Sorry Howie, I'm open to suggestions. The problem is that the seam between the top cap and the haul has broken loose. How do you go about removing the rubber bumper to get at the seam to reseal?

I never had this problem trying to help out some one with my Triton. I guess I'm SOL

I bought a 2005 Z21 last year. Do you know off hand if Ranger has any type of lifetime warrenty on the hull? The glue line has separated between the motor and the gas caps and is leaking water. ...

It is a match. its not flat gray, its high gloss and says right on the can for Torque Master gearcases. The cap on the can is flat gray the paint isn't. It matches my GEN2 gearcase perfectly.

$8.95 a can

I used Mercury Verado Silver paint 92-802878020. Perfect match

Its an electronic water pressure gauge with wires out the back. No hose to it.

I have a 2005 Z21 with a 2010 Mercury 250 pro XS. Can anybody tell me where to locate the sensor? I tested the gage, it seems fine. Thanks

Thanks guy's

I have a Solas Scorpion with a 26 pitch and no plugs. it runs 5500 rpms. Any suggestions for a prop and pitch?

Check to make sure you don't have a leak in your boat or from your live well. The extra water will shift to the back and keep you off plane. I had the same problem with not getting on plane and...

The prop is a Solas Scorpion, no plugs in the prop. If you guys think its the prop...what do you suggest Fury, Tempest, etc and what pitch? It runs 5500 rpm @ 67 mph.

a
t

7

m
p
h

I recently bought a used 2005 Z21 with a Mercury 250 Pro XS with a 26 pitch prop on it. The problem is when you floor it it bogs down. Then when it starts to plane its like the prop looses grip and...

I have the same problem on my 2005 Z21 the temp gauge doesn't work. I checked the gauge, its fine. Where do I locate the sending unit on 2009 Mercury 250 Pro XS?