Search:

It's finished, before and after photos.
547981
547982

I fish Lake Barkley 99% of the time and do fish KY a little. Yes, Navionics shows roads and bridges, but they aren't always there, they either were never there, or nothing remains of them. The ones...

The battery tender plug wouldn't work with where my plug was located so I used this one.

https://www.amazon.com/gp/product/B06Y5XQQNV/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&th=1

Same mapping, just different features.

Time on the water is the best teacher, don't be afraid to push buttons and make adjustments.

Keep us updated.

It just takes some trial and error with the settings and transducer. I primarily cast for crappie and generally run my range at 60', in shallow I have to pull the range back to see my jig.
547304...

K&K Kustomz were good to me.

There you go bringing reasoning into an electrical discussion! :laugh:

You'll be fine running the power wire directly to the fuse panel, no need to over complicate it.

I had a LSS 1 on my TM before I got AT 2. About the only time I used it was to find a brush pile or bed I had missed. I'm a crappie fisherman.

I previously had a LSS 2 on my Pro, having two AI 3-1's I installed on in the LSS 2's place. I think I prefer the LSS 2 over the AI 3-1, the image is much brighter.

Do you have a separate 2d transducer running? My Pro running a 3-1 will look like that if I don't stop sonar on the Gen 2 12 that's running a skimmer. The screenshot below is my Pro with the 2d...

Three amp in mine also.

^^This^^

I fuse anything that has a power connection.

Thanks Fireball.

I went with the vinyl. Now to get the boat ready.
546417

This is who I used, great battery and great customer service. BBC members get a discount too.

I had the same issue with my group 31 lead acid battery. After six hours of fishing my voltage would be down to 11.4v and my 90hp outboard would be slow to crank. I went with a Impulse Lithium 105AH...

They can be bought new for about $1k.

Thanks guys. I'm considering this vinyl.

https://www.overtons.com/sparta-vinyl-flooring-6-wide-383816.html

Thanks Ryan.

I don't think Lives are capable of ping syncing.

Hook the yellow wires on your AT boxes to the yellow wire in the power harness on your Pro. The AT boxes will then power up and down with your Pro. You can also hook the yellow wires from the AT...