Search:

I have bled them 3 x’s, how can you check the shock in the actuator. I’m thinking that maybe it.

I have a 2018 Patriot 21 foot with a 250 hp Mercury. The trailer that it came on has been giving me fits. When I go to pull out it’s like there is a tremendous amount of slack in the tongue. I have...

Thxs, hopefully it is working and I won’t have to get in contact with him but I have a bad feeling it’s not going to work.

IS THERE ANYONE OUT THERE THAT KNOWS A NUMBER THAT I CAN CALL TO GET AHOLD OF MANAGEMENT?

Thxs for the info .

Just purchased lowrance live unit and noticed the cable that connected to the minnkota transducer isn’t the same. Does anyone know where I can buy or the product # for adapter cable from hds live to...

LoL, no doubt.

Talked to tech, said under the gas cap three plugs. Removed one of them and problem solved. Can’t understand what the problem is with the fumes entering the atmosphere, when you open the cap, the...

Went to open compartment located between the seats and noticed the internal compartment was being pushed from up from underneath to the point it popped two screws out. Went home took the remaining...

Don’t buy a fury four blade prop. I have owned two in the past 6 months and they both threw a fin. Mercury knows it they continue to sell them to the public. To get one replaced via warranty takes...

Do they make a custom cover?

It took a chunk out of the cover, about a 1ft by 1ft section. I’ve trailered with the cover twice and both times the strap has come loose.

Has anyone else experienced the buckle coming loose on an Attwood cover and the strap getting ripped off when the tire runs over it. On two separate occasions the buckle has come apart ripping the...

I will tell you I have tried the 25 tempest, 25 fury, 26 fury and yes it gets out of the hole about 4 seconds faster than any those. I also get better bow lift.

Hey guys, I have a Triton 21 Patriot. In May of this year I started running a Mercury Fury 25p 4 blade which was, what I thought to be, an excellent purchase. The hole shot and handling was great...

Not, I have since removed the prop nut and continue to fish the same way since before. No doubt about it, the weight of the equalizer nut is causing the inner part of the blade to be stripped.

Can’t we just control the population by giving condoms to the carp? ��

Well, I dont have a equalizer on it now and I am going to see if it’s me that is the problem or if it’s the equalizer.
i have been running the trolling motor since May and discovered the damaged...

Nope, couldn’t get it off with my hand had the use channel locks.

I hate it stripped because the nut reduces the noise and vibration tremendously. I would like to see Minn Kota come out with a stronger prop so i could continue to use the equalizer.

Heres my take on it. Like most fishermen, I do hit hit limbs, rocks or other things under the water. I believe the force generated from the extra weight of the equalizer makes it harder to stop when...

The socket behind the pin would work the best in a pinch. If it happens to you on the road take two nickels and tap them in behind the pin them take some black tape and wrap around the tongue to hold...

I just purchased an ultrex, which is awesome, but the other day I was trying to remove the prop but it wouldn’t come off. I ended up having to take a rubber mallet and tapping it off. The pin had...

Got it. You were right not to plugs in the fury 25 3 blade. Took 11 seconds to get on plane at 3400 rpm. Top speed for today was 69 mph. Not a good day to run a boat at the lake.

25 tempest...

I’ll let you know on the fury prop tomorrow. I will try the two large and one open. As far as rpm’s the highest I have seen was with the fury 26 which was around 5450 if I remember correctly. I don’t...