Search:

Yes, you can connect the 2 bow devices only. you need another T and power node, and an end cap (terminating resistor).

See post #20 and #23

You will need another cable. The extension cable will connect to an arm of a T, cable from FS to bottom of T, another T connected to FS T to connect power node, terminating resistor to connect to...

You need 2 T's, a power node, a short cable to connect the FS to a T, and an end cap. The power node will need 12 volts, and connect to a T. The end caps (terminating resistors) are male and...

If you have all of the pieces you need, you'll be up and running in no time.

The Elite will connect to the bottom of a T. If the unconnected cable is coming from the bow it will connect to one arm of a T. If this is all of your components you need one more T for power,...

This is correct, at least for your bow components. How is the rest of the network assembled? Do you have the network power (12v) connected to its own T? End cap on the opposite end?

Assuming the rest of the network is assembled correctly, with a power node connected to the network and also connected to 12v, and resistor on the other end. Connect the console extension cable to...

Can you post a drawing of, or describe your entire NMEA network?

The Ghost only connects to NMEA.

Are you speaking of the puck that came with the Ghost and looks like a Point-1? If so, this is a compass for the Ghost, not a Point-1 and connects to the Ghost. A Point-1 will connect to the NMEA...

You can do this, but the only way to get accurate trailer tongue and trailer axle weights is to leave it hooked to the truck and then weigh the truck separate.

On a CAT or multi axle scale, you...

It can be done in 2 weighs.

1st weigh, boat hooked to truck. Steer axle on steer platform, drive axle on drive axle platform, trailer axle on trailer axle platform. Trailer axle platform will be...

Give me your address and I'll check

Title says it all

I unplug mine before charging. That said, I have forgotten to do it a few times.

An Evinrude Fitch CANNOT be pull started.

The forum moderator will ask that you provide your motor's serial number. It would also help to specify where the oil is coming from, and pictures will help.

And when we still had quail. Loved to hear those birds.

So is it additives that are gelling? If so, and you filter them out, then?????

And you can do it on a creeper in the garage.

Dingleberry is the last one.

Do you have a NMEA network on the boat? If so, do you have the Live and Ghost connected to it?

Heavy frost yesterday morning. This would be strawberry winter. 2 more to go.

Did your ranges change beyond the depth of water you are fishing?