Lea, I replaced the actuator knob and it was still tight so pulled all apart again. Assembled everything loose and it worked fine, the problem was the hole where the actuator knob mounts was...
Type: Posts; User: sport188
Lea, I replaced the actuator knob and it was still tight so pulled all apart again. Assembled everything loose and it worked fine, the problem was the hole where the actuator knob mounts was...
The valve is moving fine but the cable seems tight. Since I made the post have found that the actuator knob needs to be replaced it was locked tight now it is just broken, ops. I have the cable where...
Does anyone know the live-well drain valve cable length for a 2008 188?
I am looking for any tip that someone may have on replacing the live-well drain cable on a 2008 188. Was thinking that I could tie a rope on end of cable then pull the old cable out and use the rope...
The right way is the only way, you don't want repair time to cut in on fishing time.
Thanks HaulinBass.
Yes, it was full of what was left of the base and fitting. This was a Rule pump and still runs and the rest of the plastic on the housing is fine. I believe Rule is a good brand, is there a brand...
No doubt, that is why I was wanting to know about what would be the best brand to buy or to avoid. As well as the gph that would be the best to use.
http://www.bbcboards.net/attachment.php?attachmentid=276931&stc=1
It is hard to tell from the picture but all that was remaining of the flange from the pump was like white powder.
I don't think that it broke because there has never been any water leaking in the bilge area. The material appears to have just deteriorated for some reason.
Yes the screen was on the outside of the transom. The boat has been setting-up since last year and I noticed the screen laying under the boat. Everything is dry, not sure what happened, rest of the...
Thanks Milo30
I am needing to replace the original live-well pump due to the mounting flange deteriorating to the point of the inlet screen falling off. The current pump is a Rule Hi-Flow but it doesn't have an...
Congrats on the ride............
My 08 188 with 200 HO has ran 69.7mph with two people, gear and 3/8 to 1/2 tank of fuel.
GREAT Pics.......
Nice.......
Nice......:thumb up2:
Congrats...Nice Ride..........
:thumb up2:
:thumb up2:
Thanks Champion190CX
Thanks for the link HaulinBass
I have a 2008 188 with a Lowrance 520C in the console, the question is will the HDS5 Gen2 fit in the console?
Thanks in advance for your help.
:thumb up2:
Very nice rig.......
55 is no problem.......... Great Rig............:thumb up2: