Any BBCer with a DDT and cable for 250 xs (1E001079) in the Hampton Roads area? I need an oil pump prime and will pay for the service.
If you’re out there, PM me.
Thanks in advance
Type: Posts; User: bassgunner
Any BBCer with a DDT and cable for 250 xs (1E001079) in the Hampton Roads area? I need an oil pump prime and will pay for the service.
If you’re out there, PM me.
Thanks in advance
Hoping someone has this boat and can provide these measurements. Mine is at fiberglass shop and don’t know when I’ll get it back. In the meantime, I decided to upgrade a few things - battery layout...
Thanks for the confirmation, Joe. Wanted to make sure I ordered the correct part. I can’t say thanks enough for what you, Don, Savage, and the other SMEs provide here. I really am appreciative.
...
IPB indicates 19565002 is qty 1, when the part I'm referring to in the pic is qty 3. 855729 is a "mount" per IPB, not a washer.
Thanks, Joe. What you’re seeing is a dab of errant anti seize used on lifting eye as motor is currently on a pallet while boat transom is rebuilt. As for air compressor, it’s painted black and was...
518469
1E001079
Is the torn piece of rubber an adapter plate mount (PN 855729). And could the resulting metal on metal contact make a loud rattling sound at certain low-mid RPM range?
...
518468
Called Ranger and scoured the usual sites like Great Lakes Skipper, eBay, etc. with zero luck.
Can anyone recommend a source or have an extra lying around lol?
Thanks
PM sent
New to Garmin. I spend a lot of time changing gain and color gain. My push button knob allows me to change different settings (gain, range, etc) without going into settings.
Is there a way I...
I have the same boat. You can drill a hole in the partition between the center rod box and void under the dash panel. Then expand the rod box light wiring hole between center rod box and starboard...
Have you checked the transducer cable connector under the TM top cover? I ask because I found I had a bad connection on my built-in MDI+. Under the top cover is an extension cable connection, it...
I bought a Helix 12 MDI+ G4 CHO this month and received it in 5 days. Not a BBC sponsor so I won’t name them in a post, but they show 2 in stock right now. Point is, they are out there but it takes...
You should have the I-pilot puck up front, set your bow units to use that for GPS in network settings. Leave your HS puck on the transom area. I'm assuming your I-pilot puck is not the one...
I was having problems with my DI on the bow. I have the Ultrex with built-in MDI ducer. 2D was perfect but I could not get a DI picture. I plugged into my other bow Helix, still no DI picture. I...
Looking to buy a Mercury NMEA 2000 SmartCraft Gateway, PN 8M0165588. PM me if you have one you’re willing to sell.
Thanks for the reply
Looking to gauge tournament pressure on Pickwick the Aug 14-15. I know there will be a crowd of pleasure boaters and recreational fishermen but curious to see how much tournament pressure there will...
I owned the same boat and it was very good to me. You will get backwash and the location of the remote oil fill is troublesome because of the backwash. My oil fill cap seal had a tear I was unaware...
I usually leave a spot just before they start biting.
There is a lag time of ~2-3 minutes for my 1198 and 998 to be recognized on the network with my Helix G4N. The “iPilot link connected” pop-up on my xx98 units is the indicator they are online.
...
Good point, thanks.
If it works, a non-boater could benefit from a networked console unit displaying rear view. I know when I was tourney fishing from the back deck I would’ve been thrilled to be able to pick apart...
Is it possible to display one section of M360 view (front view) on one Helix and a second M360 view (rear view) on a second Helix assuming these units are networked? Essentially turning two Helix...
Does the Ultrex Bluetooth HS/Compass meet this requirement for marking M360 waypoints?