Thanks but I do not know where that would be, is it on the linage on the motor side or the shift arm on boat. I run a hot foot so the shift just puts it in gear.
Type: Posts; User: squatlo
Thanks but I do not know where that would be, is it on the linage on the motor side or the shift arm on boat. I run a hot foot so the shift just puts it in gear.
This weekend took wife out for ride got way up bayou and all of a sudden it shut down just went dead, put in shifter in neutral and would not start. I pulled cowling off of motor it looked like it...
Usually just glued or double sided tape
Leaders has 3-pack 129.00 plus tax, Thanks Amazon has best deal.
Hey is there any deals on XD 100 oil that anyone knows about, Thanks
I used a couple of wooden wedges and a heat gun, take you time and listen and make sure you remove all the screws.
I have my TR 196 on blocks as we speak, here is a quick how to. Get a good floor jack and some jack stands, go to front of boat at hitch put floor jack under it lift it up, rotate your boat jack so...
I was a die heart GMC man for years always 4x4 I switched to Toyota this year bought a 2003 4x4 liked it so much bought a 2017 Trd Offroad DC. paid about 37k truck is real nice it pulls my Tr19...
Just ordered through Sam's 107.99 each buy 4 pay for installation online save 140.00 total everything total cost 398.64 AWESOME!!! size ST205/75R14
so far I might order from sams club
Best place and price to get these tires, I live in Northeast Louisiana Thanks need 4 of them
2003 Evinrude 200 H.O. 176 Hours
I poked a hole in a RV septic tank and a plastic gas tank once and I went to a windshield repair shop and got a tube of that urethane they use on the windshields to seal it, works and is still on it...
sounds like a bent spool
Best deal I ever saw for the oil I pay 44.00 dollars plus tax with my own jug. Hell of a deal!! Just ordered me 3 gallons for 97.00
thanks for the response, that is the size I thought it was.
What size is the threaded hole in the helm 1/8 npt or 1/4 npt or something else. I'm at work trying to rig up a one man bleeding system. It is on a triton so I think it is a sea star system.
You can just replace doors and let them put a 1/4 ply on the exsisting wood and go with a new look, this is what I did years ago and you could not tell alot less exspensive
Well I changed my mind and went with the NOCO genisus 3Gen 30amp 3 bank charger. My government refund came in LMAO
Yeah I'm just charging wet cell regular batteries not the AGM's so I quess the mini 4 amp per bank will do since I don't tournament fish no more and do not have to quick charge.
I need to replace my on board charger 3 bank 15 amp each bank, I don't tournament fish any more so quick charging does not matter I was thinking about going back with the NOCO mini 3 bank at 4 amps...
A little late for my wrap up but it all went well, had to have another guy help me with the shift linkage it does take 2 people. Impeller was not that bad but I put a whole new kit in it and it seems...
Thanks, I'm fixing to put it back together I usually can figure stuff out, but it does not hurt to ask.
I have another question, while I got the lower unit off and we set it down my help turned the shift linkage and I did not get to see witch way the upper bend in it goes to the front of motor or...
Thanks for the reply's it was just bad stuck, I had to use a piece of flat bar in the gap and put a crescent wrench on it and it really popped out all at once. now another question does the shift...