Looking for 6.2:1 and 7:1 Shimano Core reels. Feel free to message me, will check messages each evening. Thanks, Andy.
Type: Posts; User: bass5aday
Looking for 6.2:1 and 7:1 Shimano Core reels. Feel free to message me, will check messages each evening. Thanks, Andy.
Looking for some of these hooks. They are the 800 model, 60 deg in line eye.
I installed the Rigid Industries head light that installed on the MinnKota Ultrex, the light works fine when wired directly and is pulling 1.7 amps. When I wire it to one of the accessory outputs...
Looking for 4”, 5” or 6” 6th Sense Core X Gizzard Shad soft plastic swim baits . Please text 276-220-5959 if you have any you are willing to sell.
Thinking about buying a 2014 boat with a 115 Suzuki motor. The mid-section of the motor has some stain or corrosion on it. Anyone know what this is or ever seen it before?375610
I believe the only reason to consider adding plugs is if it blows out on the hole shot, plugs don't affect WOT performance at all.
Dean C, can you give some more details about your experience with the Relion cranking battery?
Any updates to this? I’m thinking about buying the Relion RB100-HP for a cranking battery. Anyone using that battery on a Quad Pro charger without getting the charger re-profiled?
Any of you guys have problems getting your tires/wheels balanced? I have a 2016 Z521c with stock wheels and had to replaced tires this year, struggled to find so done that could balance those wheels.
The road in is 7 miles up the mountain, fished up there a lot with my 20 foot Skeeter but I would have about 1" of clearance on each side on the bridges. This lake sits about 4000 feet in...
Perfect! Thanks!
I know i previously read the breakin proceedure on here for a replacement new lower unit on a 250 ProXS but cant seem to find it. What is the recommended breakin for a new lower unit on an engine...
Anyone know what that measurement is suppose to be (sorry if I missed it but couldn't find it listed any where)? Thanks.
The 520 boats were a great hull for rough water. The Z20 then changed the hull and the styling on the top half of the boat, in my opinion this hull didn't ride or handle rough water as well, this...
A high pressure car wash lance will make your carpet look brand new again. Use water only, no soap, keep the nozzle about 6" from the carpet and work it back and forth, this will loosen up the...
All, I never fished Norris. Any suggestions on places to stay for a few nights when fishing there? Thanks, Andy.
I just bought a 2016 Z521c. Kept my last boat 12 years. I try to do my research and buy the most reliable engine on the market at the time. All engines start with a prototype, then they move to...
I have one, very nice. It is a great outer jacket, the sleeves don't have insulation, just and inner liner and outer jacket, the body has some insulation, When it is really cold I wear a hoodie...
Lifeline Batteries
Sounds like a negative problem, especially if those items are fed from separate fuses. Run a temporary wire (just across the deck) from the negative on the battery to one of those devices and see if...
Super nice! Just wondering what you top end speed is?
So I took some measurements tonight, the center of the prop with the hydraulic jack plate all way down is 4 1/2" below the pad. So if I run it with the jack plate raised 1 1/2" to 2" that should put...
They are expensive and relatively heavy but there is a company in CA that makes batteries (US made) for the military (tanks, aircrafts, etc) and other specialty batteries like large boats, sail...
Thanks guys! I will let you know where I land.
Sorry for the stupid question, but is the pad the lowest point on the hull or the area at the very back of the boat?