I use amsoil 10w30 and have use oem honda filter to mobil 1 filter. I believe i'm on a WIX filter right now but will have to double check. Also using amsoil lower unit gear oil also.
Type: Posts; User: Phongr82bf150
I use amsoil 10w30 and have use oem honda filter to mobil 1 filter. I believe i'm on a WIX filter right now but will have to double check. Also using amsoil lower unit gear oil also.
Personally I use honda oem water pump impeller, Lower unit oil and motor oil is Amsoil. Fluid is your choice. I have try honda, quick silver, and now amsoil. Filter is mobil 1 motor oil. I would run...
Thank you
That's good to know. I'll be doing the same on mine also than. Been needing to clean up the back of my compartment wiring. Its a mess and I'm I need to clean it up more. What size terminal did you...
I have a question and know that these Helix are known to be power sensitive. I currently have the helix 10 gen 2 mega si at the console, 1198 at the bow & 360 at the bow and ethernet box. All wire up...
What 4 blade are you running?
Good luck and keep us updated.
I have a 97 ranger r82 with a honda 150. I don't remember exactly which hull it came from but its a great riding boat. Does it have a deck extension?
Congrats on the new motor.
I don't have a 2.3 but I have a 9.9 and love that thing. It super quiet and barely burn any gas. Also own a 40hp and 150hp honda also.
I would check your prop to pad and see where its at. A compression test on the motor so you will know where its currently at. Also a 4 blade prop will holeshot better but loose a little speed up top....
97 ranger r82 & MY12 f250 6.7 powerstroke
448453
97 ranger r82 with 05 Honda 150.
448452
Toporanger a compression test will tell if you have a bad leak somewhere. But me personally I wouldn't hook up water to the motor and start it every months. I feel that's a way to trap water into the...
Is this the first run of the season over from winter? Do you think you have some water left in the motor from over the winter it could have freeze the block and crack it?
Thanks jc2bg. I will give them a call and see if I can still get the flake.
Does anyone know what color metal flake I have on my 97 ranger r82?
443518
I would take it back to your dealer to check if your getting full throttle first before messing with the prop.
I wish mine when all done will be close to that speed. I did achieve my goal that I have set from the beginning. My prop guy told me that my prop slip is at 12% with that set up and I still have some...
Grand lake 42-44 depending on area. Gibson lake was 43-44.
Buck456 I think the tempest 21 worked for my set up will be the ticket for this boat also. I just going to try a 23 just for fun since my buddie has one. I was thinking the same thing because summer...
I second the hydrodynamics rapid jack magnum. Mine is very easy to adjust.
Update 1/25/21.
PTP now is at 2.75. started at 3.25 PTP. Tested with a tempest plus 21. Boat ran 54 gps mph @ 6300rpm with motor half way trim and boat just beginning to bow lift. Air temp was...
MarkVarble boat is looking great.
I just got done doing my 97 ranger r82 with a different jackplate and all stainless bolts, washer and split washer with brass nylon locks. If I remember correctly it was 1/2 bolt and 5in long. This...