damn son you were driving it, if that was you. I used to have an H17 and would surprise a lot of other boats, not to mention scaring the hell out of some passengers.
Type: Posts; User: elite64a
damn son you were driving it, if that was you. I used to have an H17 and would surprise a lot of other boats, not to mention scaring the hell out of some passengers.
The mk47 works with the ulterra perfectly. Mine has been installed for 2 months now. MK told me the same thing but I just didn't buy it. Albeit the ulterra is wider than terrova. i can post a pic or...
When you purchase the mk 16-02 you have to specify you have an ulterra so they can send you the modified knob, At least that's why minn Kota told me when I was speaking with them.
The MK-48 works just fine. I ended up installing the mk 48 after speaking with another member who has one installed. I have a tin rig and would've had to drill new hole in my boat which would have...
I've had a Yamaha 22 pitch 3 blade and could only turn 5200rpm. Thanks though!
Thanks yall I really appreciate it! I've never run a 4 blade but I think I'm gonna get a trophy plus and run it for awhile and see how it works on my hull. If it performs like yall say it will I'm...
I guess I'll try a 4 blade. My pitch for my 3 blade is 21 so what do you think would work better a 19 or 20 pitched 4 blade prop?
Ya I am running a 3 blade Yamaha pro series
Need some help or advice here. Last week I was running down the lake at about 3/4 throttle in my 2011 Xpress H17 Yamaha 115 4stroke when I decided to turn left then right to miss a log initially when...
Could the shear pin have sheared? I did not see that mentioned.
For 5 batteries you could look running 2 of the batteries in parallel it will charge a little slower until the other 3 are fully charged then your charger should switch and provide full power to the...
I've had the Bass pro 3 bank charger for 3 years now and it has never given me any trouble at all. and yes it is the same as the pro mariner.
Brian at BBG Marine said the mka-47 won't work with the ulterra b/c of the width minn kota never responded. I know of a guy on here that has the ulterra and said bracket. All in all I have 1 no, 1 no...
Whatever happen to using scotch guard? That is what I use for my military issue gortex when it start soaking up water instead of shedding it.
If your thinking of spending that much already why not go with the optima blue or yellow top?
Where exactly did you put the screws?
...
I've never had any issues with USAA what so ever. I have finance many of vehicles, motorcycles, and my boat through them they've usually beat everyone's interest rates and their customer service has...
If it were me running the batteries in series I'd use 2GA for the jumper then 6GA up to the trolling motor. If you have extra 6GA to use for the jumper I don't see why it wouldn't be alright. just...
I would just rerun the wires changing the system to a two wire system.
I appreciate it thank you. I will check that one out. Geez 190 is EXPENSIVE.
That is the MKA-47 right? did you have to drill any additional holes in your boat to mount everything? Also how tight fitting is it and does it make any noise at all?
Everyone who already has an Ulterra and is using a quick release bracket. Which one are you using the MKA-16-02, MKA-21, MKA-32, or MKA-47? I have been told the MKA-47 will not work however, I have...
Do you still have the prop?
Not a problem 10lbs. Since Minn Kota made no mention of the MKA-47 fitting I spoke with Brian at BBG Marine and he confirmed for me the MKA-47 is not compatible with the Ulterra due to the width of...