Update: I powered the unit on this am. Then hit stow. The remote said “stowing”,same as before. But this time, while it was attempting to stow I picked up the foot of the TM making it more...
Type: Posts; User: rexman100
Update: I powered the unit on this am. Then hit stow. The remote said “stowing”,same as before. But this time, while it was attempting to stow I picked up the foot of the TM making it more...
Hey Skeeterstew, I also was test fitting a transducer. So I deployed my TM onto my trailer. When I hit the stow, the motor turns on its own into the winch, as per other posters. I followed your...
I have a 2003 and found the oem wesbar in LED , not sure why in 2002 you have to flip them?
Same thing here, bought the new cable hadn't installed it yet. Because of bleeding of the brakes, requires two ppl but also not sure how to, any advise?
Ok done deal. I was a little confused on the com wire. You disconnect from the battery the red positive wire that runs to the 30a breaker switch. Then you hook this wire to the com lug on the...
Ok, this weekend I'm going to finish the install. I mounted the plate so far. However, I had to use different fasteners. Instead of the six screws that mount to both sides of the rear hatch. I...
Thanks for the instructional walk-thru, I recently purchased the kit from Ranger as well, I have an older boat. (2003 205dVx w/ 2012 250 yammy sho) my issues is that my batteries aren't close...
if you;re looking for the front plate that houses the gauges, you can make that yourself
out of sheet aluminum and a hole saw. If you're needing a complete console out of fiberglass, (ive been...
Just to let everyone know, I ran the boat for a couple of hours on the lake and she didnt run hot AT ALL!! , apparently it was the sensor. thanks, for all you guys help!!
Welp, I ran the motor for 10-15 mins (timed) and max temp was 145-148 degrees.
But why do i have this odd feeling when I run it @ WOT that horn will come on and put me into S.L.O.W.
A similar...
did what you said, couldnt find the thermo sticks, so i bought an infrared thermo pointer tool. How long should i run the motor on the muffs till it reaches full temp?
what should i be looking...
can I run it with the muffs on it, or do I have to run it on the water to get an accurate reading? I support my local Evinrude dealer and he sold me a new temp sensor, (the one with 2 wires) . ...
OK, to follow up, I changed out the thermo seal on the block, the hole was outta round somewhat but i used a rubber mallet to get it in there. Ran the motor. Noticed the water from the telltale...
what number in themodel number determines the year?.. because J150 G ENC
I am not certain that the "G" is correct.
Crawfish and beer mmm, seasons over for crawdaddys, its boiled crab and shrimp season now, Ill look into raising the motor to one of the lower top bolt holes. Right now its about 3.5" pad to...
i can slide the motor up off the transom another 1inch. that would put me 2.5 inches to the pad. (its not bolt holes its slides up or down) i have a torque tab on the skeg as well.
i was just informed that my boat isnt designed for a jp, hmm, its 3.5 " under the pad .
http://photos-g.ak.fbcdn.net/h...n.jpg
maybe these links above will work. Ya, i need to offset as much...
what is your rpms at WOT (wide open throttle) ?
It has good hole shot, if im trimmed correctly, if not it;ll be pointing straight up then fall like a lumberjacks giant pine tree. But thats on me, im thinking, or am i missing something in the...
its a rajun cajun, that measures 19.0' exactly. (not sure of the model) above i have included a link to the pics, do they work? I have a 21' raker on there, and im gettting 6000 rpm. Its 3.5in...
It probably wouldnt be a bad idea to change out the WP, not sure about # of hours, If i was to guess i would say not many, but age wise id say 4-5 yrs.
what is wfo (wide f...ing open ? ) hehe and rtv? Interestingly, i just had to replace my rectifier from the last overheat. maybe this motor is bad for this boat, or vice versa... btw i will...
http://www.facebook.com/bert.s...47129
if that doesnt work, try :http://www.facebook.com/bert.strander?v=feed&story_fbid=1163820709570#/photo.php?pid=316510&id=1649447129
to see my exact...
How can one tell if the water pump needs service or replacement? I know the obvious, if there isnt any water coming through the telltale and all screens are cleaned.
but what about a...
engine @ idle with water hose ear muffs on the intake, what pressure should i read? or is this not telling due to the hose pipe pressure? I think i can find a sweet spot fully trimmed or close to it...
