I used a palm sander to remove the glue from my aluminum lids, no chemicals and worked great.
Type: Posts; User: Team Mud
I used a palm sander to remove the glue from my aluminum lids, no chemicals and worked great.
Check the hub after you go on a trip to see if its getting hot, If its getting hot you may have bigger problems.
There's a O-ring between the outer cap and hub, The O-ring may be bad.
clean with wire brush and oil every year
how old is the trailer?, the older ones did not have a back-up solenoid, Drum or disc brakes?
look on ebay, you may be able to find one?
I had a 1999 ficht 200, i know one thing, these motors don't like to start when its cold out, I think the motor needs to spin at 200 RPM's before the computer throws a spark.
I spent a lot of hours...
i've never done this, but i think this would be a good fix.
I would remove the rug and glue a piece of aluminum plate on the top, make it about 1/4 shorter all around and file the edges, then re...
Before you spend any money, try oiling the winch, theres alot of moving parts that should be oiled, it may work better for you.
I oil mine once a year, it really helps a lot.
your best bet is to remove 1 wheel and bearings, the bearing number is etched onto each bearing.
any good automotive parts store should have them
If the grease looks good, clean and inspect the...
I replaced the fuel pump and took it out yesterday. Everything seemed good till it wouldn’t start. I looked under the shroud and saw the cam follower roller was broken. This is probably the 3rd time...
MAYBE? my old trailer had a small shock absorber in the tongue, if this shock absorber is bad, the brakes could come on too fast, MAYBE?
I think i had a similar issue with mine, but that was a...
1998 TR-20, all scratched up, faded paint, just broken in, Love it!!!
i hit a rock in 5 feet of water on a take off, bent prop shaft and 4K later, i was good to go.
OK thanks, I found a OMC for 59 bucks on Ebay, waiting for shipment now
I dont see any external leaks, i plan on rebuilding the fuel pump soon.
could be a crack in the hose somewhere, mine had a crack in the Motor sock, where all the hoses/cables run in the splash well
the hose probably froze during the winter and cracked the hose.
you...
I use Bass Pro Shop Reel repair, I think it's 22 dollars labor, plus parts
if for some reason your reel cant be fixed or parts are obsolete, they have good reconditioned ones fairly cheap.
thank you, i'll check it out and get back to you guys
1991 Johnson 15 HP, J15REIA
I have had this motor for years with very little problems, but lately, not all the time it has been giving me a fuel issue, I think?
sometimes when I go to take...
check Rock Auto for spark plugs
i always keep the back hatch cracked when not using the boat, allowing water evaporation and any battery fumes out of boat.
we hope so
You'll know if its real bad, grease will be everywhere, all over the rotor and wheel.
If it's not real bad, i would keep a eye on it see if it gets worse.
I've had 2 seals go bad in 4 years,...
longer trailers are easier to back up too, they don't jack knife as much
Seeing that Bass pro Shop Excel Mono is probably the least expensive, that would be cool to see how this line would compare.
Ive been using this line for over 25 years.