Pm sent
Type: Posts; User: STLBassBuster
Pm sent
What condition is the prop in?
Yep you will need to drop down in pitch. I would see if you can borrow a 24P 4 blade or a 25P 3 blade to start.
Call C&O marine in White Bluff TN. and talk to their parts department. They will have the fasteners you are looking for.
You can try etrailer.com or C&O marine after you take some good measurements of your stock fenders. I have a 1999 203 sitting on the original tandem axle trailer, would love to put stainless fenders...
Your 4-stroke SHO has a different power band compared to your old 2 stroke HPDI. You will need to tinker with some different props & the jack plate height until you find its happy place. I ran 25...
Can't hurt to investigate the age of the battery, if it's not that old charge it up and see if that makes a difference.
Jerry you got her looking sharp! The Llebroc's are a nice touch.
I agree, that's a good price.
Yes this unit is compatible with the Mega 360 transducer.
you will probably lose 1-2mph on the big end.
I have a 1999 203 with a 98 225 OX66 VMax. Is your 02 sensor clean? No leaking lift pumps? I switched from a tempest 3 blade to a fury 4 blade. I lost a couple mph on the top end but I really like...
I will take the ark rod.
I have an ultrex and have the Comfort troll deluxe tray. Do have anything flush mounter on the bow you can remove to see whats under the front deck? Champion used a pvc or conduit to run wires...
The Yamaha M series is also a killer 3 blade for our champions, it will get you better bow lift than a tempest.
The Yamaha M series is another really good prop for our champions and will lift better than a tempest. Personally, I like a 4 blade for the best hole shot and rough water handling and run a Fury 4...
You have a lot of sentimental value there. It's a tough call indeed. If you decide to keep it, run it a couple times a year to keep it fresh. I would not put baby in the corner for 10 years lol.
That is correct.
My 1996 catalog shows 48 gallons (main) and 6 gallons (aux) for the 194 Fish Hunter.
I’ve seen it on the top cap when the boat has sat out in the elements for a long time. Environments in the southern states can bake em!
Congratulations on the purchase! I know the 3.1L OX66 really well (I own a 225). Make sure you clean the 02 sensor, and the port that is behind it. Their are lot's of youtube video's on it. It does...
I would be more concerned of any bigger stress cracks than crazing, especially near the back corners and transom area. Inspect those areas thoroughly.
If that boat was in the Midwest, it would have been sold months ago. The Yamaha 3.1L OX66 is arguably one of the best 2-stroke outboards ever. The 188 is a top performer, get it dialed in and she...
I ran a 1998 203 with the 250 Merc V8 4 stroke. It did very well with a 25 Tempest. With your 225, probably will need a 24P tempest or Fury 3 blade.
Your 200 elite probably has a 10" slidemaster or Bob's hydraulic jack plate. Did you measure the plate that is on it now? I would not go with anything more than a 10" plate on that hull. If you need...