Search:

I have a 1999 518vx with 36v setup if that helps?

Steve,

I have the same boat with a 2013 200 pro xs. Put on the fury 4 24 last year and love it. Added a single power pole this year and I believe I’m somewhere between 2.5 and 2.75 below pad. ...

Sometimes you’ll see them on EBay. Otherwise, Ranger does make a replacement set of switches for this. Won’t be identical but will work and fit in the same area.

Thanks for the feedback, I did consider a jackplate but wasn’t able to find a used one to fit the bill at the time.

The 2 to 4 bolts confuses me? Did I miss some directions I should have read? ...

I move them to Google Photos this might work better
https://photos.app.goo.gl/FThaR5GSmXP4Alfv2

Completed the installation of a single 8’ power pole pro on my 1999 Ranger 518vx. Took my first trip out today, and I’m very happy with the results. Here’s some of the good and bad with the...

:popcorn:

Does anyone have pics of the pumps under the splash well they could post? Thanks!

Do you need to manually switch between the lss2 and puck if there on the same HDS unit?

They show a photo but no specifications on the other transducer. I believe it's an 83/200 puck but would verify before I purchase. I was thinking the same route as you suggested to mount the...

Thanks for the quick feedback, much appreciated. Another question is can I still mount the totalscan transducer and connect that along with a separate 2d transducer to a single HDS gen 3 unit or...

I've done a bunch of research and haven't found a conclusive solution. I'm looking at the Lowrance boat in a box solution for my boat. It includes two HDS units and a totalscan transducer. My boat...

1999 518vx - 2013 200 Pro XS - Fury 4 - All Holes open, no plugs.

Good Luck!

There is likely a cylinder not getting oil. If you're taking this to an Evinrude Tech make sure they know and understand how to properly diagnose the potential causes. I'd grill them on what they...

Some things to consider. A boat without a running motor is just that, won't get much for it. Investing in a new motor on an older boat isn't great ROI, I agree. Is buying a new boat a good ROI? I...

I had the same problem in my 2013 and they ended up replacing the reservoir with a new one, actually I insisted on that. But as an interim step before it arrived I used a piece of garbage bag ( 2" x...

Any boat is only as good as the engine that's pushing it. Have you considered that factor in this decision? What the manufacturer is and what issues if any have been encountered?

I'm not sure of your detailed trailer, but in general, in a pinch, seals are available locally at an auto parts store. Just need to be sure to install them with Hi Temp RTV. Not sure if you did a...

I have a 1999 Ranger 518vx with a 2013 200 Pro XS on and I switched from a 25 tempest plus to a 24 fury 4 this year. All holes open in the fury it pops very nicely out of the hole and I notice a big...

Thanks for the speedy response. Parts in my area are hard to get and I waited a week for them to arrive and when I saw the hub with no way to add the grease, I got nervous.

I currently have oil bath hubs that I was planning to replace with Vault hubs. I'm replacing the hubs and rotors (UFP). I ordered new parts and have them (UFP). My spindle doesn't have a hole in...

I have a single axle trailer and went through several sets of marathons and I didn't feel they held up well and would round over on the edges and could catch air on bumps (518vx). Moved to Kumho...

I repaired a soft one - removed the carpet and fiber-glassed it. Still not perfect but I'm living with it. I had another that was cracked good and replaced it through Ranger with carpet on it. ...

That's exactly what I did. Remove it carefully and lay it out and traced around with a sharpy. You'll want to make sure it lays flat and lines up correctly, but it's a great way to do it. For the...

2nd on the "Goof Off" - I used it on my boat and it works awesome!