I found the link for the January 2024 content bundle and it fixed my issues. Thanks to all that helped
Type: Posts; User: Blindhogg
I found the link for the January 2024 content bundle and it fixed my issues. Thanks to all that helped
Thanks Folks. Ill poke around and give Garmin a call if I can't find it.
Thanks. I’ll try that
I have 4 Garmin Echomap Ultra units. I had not updated them (version 16.1 and my GLS10 was on 2.1) but since I recently got the LS34 I have to update.
I decided to update one of them (Echomap...
Thanks. I probably will sell the 102 I am replacing. Thanks for reminding me.
Thanks. I updated my Force with Active Captain (only way I think) and I downloaded the update from the Garmin Website to my computer and the. Transferred to an SD card.
sounds like it does...
OK….. so I hope I can ask this intelligently.
I have upgraded from the livescope 32 to the 34. I did a complete change out including the black box. My units (echmap ultras) are on version...
If it is a center mount jack and you want to replace that…..I was told by the manufacturer that you have to obtain from Ranger
of it bolts to the side of the trailer rail I am sure you can find a...
Full load for the Force is 57 amp. That exceeds a safe 8 gage wire capacity. As mentioned above you could breaker limit the overheat risk but it would likely be very annoying to fish that way.
Good comments on wire size and breaker. Same thing happened to me but I had a different solution (kind of). I bough my boat used so I did not track down all of the wiring from battery to device. ...
Thank you very much.
I have a GT 34 side and down vu transducer. I recently purchased a transducer shield and saver with the wedge snd plan to mount them on the bottom of my hole shot plate. I have a Bobs machine...
I have exactly that same boat a 2011 Z520. Not the original owner, but no evidence that it was changed when I bought it. Mine had a Rule with a mechanical float switch. I re-worked my bilge area...
Thanks
Thanks guys. I’ll do that when I get back to town.
Folks
i am not near the boat tonight so I can’t just go check.
I need to do a software update my Garmin Force when I get back home Obviously the TM has to be on to do the update but I am...
Thank you Mr Driscoll. I appreciate the response and help.
Very nicely done. I may steal your design
I did not want to hijack the thread on mapping but I have similar questions.
I have:
2- 122SV units
1 - 126sV unit (supposed to be 3 122s but the order came in wrong. Boat was at the...
Post has been up three days and no one has been close.
Not a HE at all.
She just finalized the divorce.
I was ready to buy this one...
https://www.amazon.com/gp/product/B00CUOAEIW/ref=ox_sc_saved_image_9?smid=ATVPDKIKX0DER&psc=1
Then....it healed itself.
Ashamed to admit it and not believing...
I think a power pedestal is about $175-$200 (ish). depends on length. They are made by Springfield. Bass Pro or Google it. I bought a Millennium Pamal seat from Academy for about $100 (ish). ...
Thanks Mike. On my list today to try. If the pump is the issue I already have a Johnson with a real foot picked out. Just hope it’s the pump
Thanks. I appreciate the response. Hopefully its the bilge. If not.....bigger hope is they still sell the brain box for an 12 year old boat.
Again...thanks for the response.
Gents
I have the dreaded blinking stop light on my 2011 Z520. It will not reset. From searches here and reading the manual I know that condition exists because of one on the 6 un-switched...