Search:

You might try this outfit they've been Johnson/Evinrude dealer for like 70 years or something.

Dave in parts at
Sea-Way Marine
6306 202nd St. SW
Lynnwood, WA 98036

800-332-0803...

Rodger that!

Thanks Rood, Danrude and 2manytoys!
Not sure what a link sync is there Danrude.

Good idea mactlamn, I'll give it a try.

Hello,
Model 225FPXRSB sn 05041465
Issue is the port side tilt tube grease zerk won't accept grease even after zerk being replaced.
Tried trim/tilt raising ob up and down to see if it makes a...

Thanks 2manytoys and mactiman,

I'll take a look at them and see how much slop there is or if they've disappeared. Things seemed pretty tight honestly, I was able to get the TPS up to 96% with some...

Thank you mactlman for the advice, yes my roller is still on the linkage. Engine only has 357 hours I believe.

Question for Seahorse and other Evinrude/Johnson motorheads,
Model E225FPXRSB sn 05041465

Have not been able to get to my usual 6000 rpm wot lately. I noticed connecting the EV Diag that I was...

Bassmeister,
This is going off topic bc i have another post about water in fuel. I apologize for the cross post.
I was told by a old and now ex Evinrude dealer mechanic to run premix thru the fuel...

Thank you Seahorse.
Is there a possibility of the injectors allowing enough water in the cylinders to hydrolock a cylinder? I wouldn't think so. But the last time we ran it wasn't running that...

Thanks Seahorse, all good things to consider.
In regards to fuel pressure, is there a way to check it with the computer or you have to check it with mechanical gauge? I haven't seen anything on the...

Hi All,
What do you operators see as far as plug color goes and under what conditions for DFI big blocks(3.3)?
What oil?
Idling to 1500rpm?
3500-5000 rpm?
WOT?
Just trying to get an...

Update on my water in my 225hp. Talked with a very helpful service tech in Fairbanks. He said to get all lines and filters clear (already did) pump by hand with fuel squeeze bulb so fuel comes out...

Thank for the responses Dalett and Bassmeister. I've already purged Boston Whaler 22' Guardian tank up to the on engine fuel filter and my Racor on the bulkhead. My issue is really the pass the...

Good Morning from Alaska, (no we do't have any bass up here except sea bass, does that count?)
We're out running doing our early preseason shake down when the engine starts to sputter and then dies....