I finally had time to mess with it. It's the oil level sensor. I turned on the key and got the codes. Pulled the sensor and put a magnet at the top and turned the key on again, no codes. Put it back...
Type: Posts; User: kdubracing
I finally had time to mess with it. It's the oil level sensor. I turned on the key and got the codes. Pulled the sensor and put a magnet at the top and turned the key on again, no codes. Put it back...
If the level sensor was bad, wouldn’t that give the low oil warning and not the pump fault?
SN 0T921524 - Out on the water and the Oil Pump Fault lights came on (bell, engine, oil symbols together). Limped it back to the ramp. Beeping would be solid at above about 3k RPM, would go back to...
Thank you. Got what I needed from them.
Trying to find where I can buy replacement o-rings for these. I have one that is starting to leak out of the cap. I've looked around a bit and can not find part numbers or where to buy them. Any help?
Thanks. I figured out it's basically impossible to find just the male part, so I ordered a TH Marine coarse thread replacement and will replace the whole thing. I got a spare also.
Somewhere on my way to the boat ramp today, my drain plug fell out of the boat. So, my stupid question, is there a specific size I need to look for for a replacement plug, or is it pretty universal?...
Thanks. That's pretty much what I expected. The one loaded on my older Lowrance is ok, but not spectacular for Clinton. I just wanted a better map on my Humminbird to use waypoints better.
I’m guessing at least some of you guys have a Lakemaster Great Plains chip. I’m curious how the Clinton map is on that? I’m considering getting one, but curious how it compares to the mapping you can...
Don't go to Hennepin Marine. I bought a part recently from Buells in Canton and they seem ok, but haven't had any work done. Keep posting what you find, I could use places also. I'm just north of...
It’s an 8, not a 9. Typo. But if the transducer won’t go on the trolling motor, I’ll probably go a different route. Thanks.
Please pardon my ignorance. I got a used boat last year that has a gen 1 HDS 9 with structure scan on it. The side/down scan isn't the easiest to read or the clearest, especially compared to the...
Ok, thanks. I have the round one, so mine is 2d only. That eliminates my hope to just buy a new unit and plug and play. Maybe I'll start with a better SI/DI unit for the console.
I have a couple of pretty basic questions I am completely ignorant about. I bought a used Ranger last year that has an Ultrex on it. Here's what it has for electronics. Console - gen 1 Lowrance HDS...
I figured it out. I made a stupid rookie mistake. After thinking about it, it really seemed like a fuse. So I went back and double checked the fuse box. I found the electronics fuse and tested it. It...
Also, the transducer is not coming on either.
I was out on the water the other day and lost power to both of my console graphs. Nothing else lost power. Bow graph livewells, bilge, starter, lights, everything else worked. I know that means there...
Thanks. Didn't know you needed a permit.
I saw they have restrictions on fishing near private property. It looks like most of the shoreline is private property. Are there decent places to fish the shore there, or are you pretty much...
Thanks again for your help. Parts are on order, hopefully I'll be on the water this weekend.
Perfect. Thank you. One more quick dumb question and hopefully this thread can die.
How do I replace the base? Specifically, how will I attached the wires to the replacement base? I looked around...
453786
This is it I believe. I pulled the main relay and put one of the trim relays in. When I turned the key on, i heard what sounded like the fuel pump run for a second. I looked at the female connector...
I don't hear anything that sounds like a fuel pump running. When I turn on the key, the only noise I hear is one click that I'm pretty sure is coming from the solenoid. It's coming from the roundish...
I’m 100% sure it was a ground the light was clipped to. I used a screw another ground was attached.