Search:

Does anyone have the lowrance gimbal bolt pattern?

Does anyone have the bolt pattern for the garmin gimbal mounts?

I have a 2020 721, I put a 7’ megaware on and started it at the top of the wing closest to winch eye. Installed and pounded with rubber mallet. Hasn’t gave me a minutes trouble.

2.75” prop to pad

I’m running a 721 with blades and a stock 10” manual jp. Best speeds I’ve seen with the 24p fury is 77 at 5950 in 95° weather. I have a 25 tempest I need to have worked and see how it does. I don’t...

I tore it back down and put the original impeller back in. All is well now. After talking with several folks I believe it’s best to change everything when doing the impeller change. Thanks for the...

I had a few issues with the sho that made me Leary of it. And my motor is a 12 model which was one of the years they were still having some trouble. Just thinking I’d try a merc. I ended up making a...

Pulling the trigger on a new 721 this week. The dealer has the colors I want with a sho and a pro xs 4s. Iv ran a sho for the last year and honestly not real pleased with it. Only merc I’ve owned was...

Recently changed my impeller due to what I felt was lack of psi compared to what I normally run. After changing the impeller, it takes longer to prime at the initional start, but runs great pressure...

Guess I can quit worrying about it now. Lol thanks guys.

Question for you guys, water pressure is 4-5 psi at idle, and 15 at WOT. If I’m running 4500ish rpms water pressure will be 15 and fall down to 8 them back up to 15. Also at WOT the stream coming out...

Buddy’s lower went out yesterday. He’s got a 02 model 150 0x66, I found a 05 200 0x66 lower I think will fit. Just seeing if anyone knows for sure before I make the drive to go get it for him.

I built a aluminum mount between the aluminum transom brace. I used the existing holes to mount it. I’ll try to take some pics tomorrow.

Prop hasn’t hit anything, whatever is going on is a result of the lower unit locking up.

Long story short, lower unit went out from lack of oil. I was running around 5500 rpms when it locked up, killed the motor instantly. Motor wouldn’t turn over due to upper bearing in lower being...

Yea I saw your post, but if I’m gonna pay 350 a pole to convert I might as well buy new ones. No offense to you, but if the ID is the same size and fittings can be found, I don’t see why you would...

Have any of you had any luck converting the pro series with the 1.0 pumps with the 5/16 plastic lines over to a rubber line? I found 3/16 I.D lines with a working pressure of 3500 lbs but I haven’t...

ZX20 with a 26 FXP turning 6200 at 74 loaded with both tanks and partner as well as both livewell a full. I do have a lot of prop slip (18%)

I’m considering swapping over to a different brand of graphs. I have the following and curious what I should ask for them.

Helix 9 Mega SI G2N GPS year old
Helix 9 DI G2N GPS year old
Helix 9...

I’m running a 250 sho on my ZX20. 6150 rpms @ 74 mph turning a 26fxp. Boat is still in factory setting with 7 dots showing on the JP. I can still turn the same rpms with tanks and livewells full. I’m...

That’s my plan.

I had 2 G2N 9’s on my boat. 1 at the console and one at the bow, networked together. I decided to install another 9 at the console to run primarily as a dedicated mapping unit. 1 at my console is a...

Buddy whacked them pretty good today. Just gotta look for them. Water clarity is different all over the lake. Main lake is dingy, but the fingers off the lake are relatively clear.

Well I don’t have the stock ecu, so hopefully this will work. We will see.

I recently bought a blown 2.5 for a steal. I’m looking for some answers before I decide what I’m gonna do with it. I don’t know a lot about the motor other than is has 2 burnt pistons. 1 piston is...