2012 Ranger Z520 trailer, front tire on starboard side. I noticed some wear on the tire and found the vertical bolt loose. What is the correct rotation on the round spline stub? I am thinking it...
Type: Posts; User: Mitrch
2012 Ranger Z520 trailer, front tire on starboard side. I noticed some wear on the tire and found the vertical bolt loose. What is the correct rotation on the round spline stub? I am thinking it...
Im the third owner. I was just wondering what effects larger setbacks had and if any on holeshot.
I have a 2012 Z520 with a Atlas 10" hyd jackplate and a etec 250. Just wondering what setback others have. What are the pro/con for a 10" setback vs a 4 or 5" setback?
TIA
Power Pole hose busted in the splash well area and sprayed oil on the carpet. What is the best way to clean the oil out of the carpet?
Has anyone upgraded to the new hose style?
MichAngler has a great point!
Would love to see my danger / caution icons instead of the little blue dots on the map while running.
I had my boat die on me and would not crank back up. So to the shop it went. They said my connection on my capacitor had alot of corrosion on it. So they cleaned it and sent me on my way. Well I...
It was more clear than milky. I will be waiting for the dealer to open first thing Tuesday morning. Just wondering if there was anyting I could check myself.
2010 250 Ho
Son was fishing a tournament and said motor worked great all day until time to head in. They got up on pad for about 30 seconds then it just slowed down just like you would do when...
Thanks.... it is brownish and is coming from the throttle bodies. After a good cleaning and running it, yall are correct once again! Thanks again!
replacing the speedometer tube does it matter if it is the hard black plastic or soft tube like a fuel line?
2010 Etec HO 250
Had the boat in the barn and walked behind it to find some oil on the ground. Pulled the cowling and seen that the oil is coming from the front area of the motor. Pulled the air...
http://www.bbcboards.net/attachment.php?attachmentid=321114&stc=1Helix 10 mega
I had some work done on my motor and remounted my unit which included redoing which spades the power was plugged into...
What does interference look like on side scan? I did some work under my console and moved some wires and now my side scan water column is all fuzzy. Yes I had it wired to the power under the...
If you plan on getting the MK Ultrerx you will want it to stick up some to make it easy to hit the buttons.
i replace the latch me plastic one not knowing of the one they talk of above. The thing I did was find the right thickness combination for when the lid was closed and used silicone to put them in...
I am noticing it is getting stiffer shifting into gear. I have a 2011 250 etec ho on a ranger 520. Any thoughts on what to check????
My buddy has a Helix 10 mega si G2N & Helix 9 di G2n. Is the update for the 10 the same as the 9? He has asked me to update his units. I have the same 10 so I can use the card I used for my update...
This is on the back of the motor and I do get a pressure reading at the console.
2011 250 HO Just wondering what it is and should it have a tube on it?http://www.bbcboards.net/attachment.php?attachmentid=312368&stc=1
2011 Ranger 520 with 2011 Evinrude 250HO and 25P Fury3 wot 71mph @6000 rpm. That said would a 26P same prop give me more top end but slow me getting out of the hole? What would the reason for going...
I have a question regarding the 360 bracket that fits on the Ultrex. what is the distance between the 360 pole and the TM shaft?
I was wondering if anyone has mounted a Helix 9 or 10 at the console on the dash. If you have PLEASE post a pic. Did you add a steering wheel extension and how much clearance do you have?
I...
I use my gps hs at the bow. I mark my offshore structure with my curser at the console. I feel that I get better results that way.
When using downscan what is the signal degree? How much bottom coverage am I looking at at a given depth?
This one has a 30 amp inline blade fuse.