Do I need individual marine grade wire from switch/ battery to each unit, mega live, 360 or can I run one to the console and one to the bow and supply power like the Sea Clear Power wire harness?...
Type: Posts; User: OUTLAWMEDLER
Do I need individual marine grade wire from switch/ battery to each unit, mega live, 360 or can I run one to the console and one to the bow and supply power like the Sea Clear Power wire harness?...
Would a hard freeze be a cause for this?
No smoke, motor never loss power, just a oil alarm
What’s the avg cost of repair?
My oil alarm came on, idled back to ramp and got it on trailer. First thing I noticed was oil residue around my lower unit and prop. oil dip stick was showing just a little oil on the tip and it was...
It’s a 2013 520z
Okay my keypad was not powering up, bought a replacement and now only able only to start/ stop motor. Would the next step be the computer? Is that common for both to go out at the same time?
I’m getting power to the interlink, and to the keypad
Has anyone had the touch pad stop working completely, no lights or functionality at all. I’ve had them go out on other ranger boat but still had some use either the start/ stop or accessories. I’m...
What’s a fair price on a Helix 9 G2 Chirp SI/DI unit everything included?
No wear sleeve on these spindles or o ring
its a 2013 ranger. The seal is correct to the 2.56" OD x 1.68 ID. I did was counter sunk the seal below the edge of the hub. I seen a video that said just to press flush. Any thoughts?
not sure, purchased through ranger. Invoiced didn't have a part #. Any idea on what seal it calls for?
Anyone have issues with the vaults hybrid hub system? I had a lot of oil push out of the back seal after replacing the bearings. Any thoughts?
Anyone had any issues with using the hybrid oil? I had a lot of oil push out of the back seals after replacing.
Thank you
Need information about replacing steering tube bushings, how difficult? Do you have to remove the motor?
Thanks for the tips. I'll give it a try.
I love my Ranger boats but this seems to be a common problem I have with the way they use riviets on the compartment lid hinges. They come off and I end up replacing with stainless steel screws but...
I have 2012 Yamaha SHO VF250LA serial # 6CB L 1005057. My question is how hard is it to replace the louver on the side of the top cowling assembly? It bounced off a dock while tied up and put a nice...
The diplay seems to be froze up. No speed reading and it's stuck on trip. The gas gauge is working. This is the round gauge. Any ideas?
I'm looking at a 2013 Ranger Z520 with a Yamaha 250 Vmax SHO. The motor has 280 hrs. I have zero knowledge of Yamaha motors, always have ran Mercury. Its seems to run great but i'm concerned about...
I'm looking at a 2013 Ranger 520c with the 250 Verado on it. My concerns were the extra weight of the Verados along with adding a couple of power poles and how the transom would handle the abuse that...
I'm looking into buying this rig. Looking for feed back from someone that has this same setup combo.
Thanks for the help.