Hey guys,
I've got a chance to get a 2001 Triton TR-21 with a 2001 Johnson 225. I'm weary of the motor, but I'm told it is a fresh rebuild by a local shop that I trust. Unsure of graphs, but I do...
Type: Posts; User: coreyprashaw
Hey guys,
I've got a chance to get a 2001 Triton TR-21 with a 2001 Johnson 225. I'm weary of the motor, but I'm told it is a fresh rebuild by a local shop that I trust. Unsure of graphs, but I do...
Thanks Thamelau, I'll do that after testing the impeller this weekend! Never thought to mess with the jack plate much as it was set up before i had it. Thanks a ton!
After the fuel filter she's back up to 57.5 MPH and 5500 RPMS! Did notice a drop in water pressure though, so going to swap the impeller this weekend. My question is- should i live with the 5500 RPMs...
Update- started her quick and she fired up significantly faster than usual. Usually it takes 10 seconds or so with the choke on to fire up. This was after spraying carb cleaner in each carb and...
Just put seafoam in the tank and noticed that it all sat in the fill hose. my vent is connected to the same port as my fill hole. theres a pretty good slope. i've had issues putting gas in it before...
I'm assuming the test is to get her running WOT and then pump the bulb to see if RPM goes up? lol
PS- Thanks for the help here guys. No mechanic, but I like to learn this stuff.
Nutoy- Do you think that would clean anything out of the jets?
No change after swapping plugs. I've got 2 new fuel pumps and a fuel filter assembly coming in the mail for friday. I'm starting to think i got a bad batch of fuel that sucked something into my...
Good point. it was cold that day. would have been a month ago. maybe that 25 tempest is just too much prop. i've swapped the plugs and same results. i do also notice that it will die at idle after a...
Hey guys,
I have a Skeeter Zx185c that i have a 1997 yamaha pro v 150 on. It has been great so far. I bought it last year and was hitting 57-59 on a good day at 5500-5600 RPMS. I swapped the...
Hey guys,
I have a Skeeter Zx185c that i have a 1997 yamaha pro v 150 on. It has been great so far. I bought it last year and was hitting 57-59 on a good day at 5500-5600 RPMS. I swapped the...
I had originally thought that it was the other tube, but the control won't go that far over to mount in the tube closest to the motor.
All,
I have the seastar kit almost installed but i have a gap on either side of the steering tube. Is this okay? Is there a part i didn't get that is supposed to close the gap? Pictures for...