Thanks for the advice! Boat tank pickup screen was clogged as well as pump that needed a new o ring as well(leaking). Boat was sitting unused for 4-5 months(Maine winter).
Type: Posts; User: Keith A
Thanks for the advice! Boat tank pickup screen was clogged as well as pump that needed a new o ring as well(leaking). Boat was sitting unused for 4-5 months(Maine winter).
Good evening,
I'm up here in Maine and just took my boat out for the first time since last fall. About halfway through the day I got a solid beeeeeep, and turned the outboard off. I checked my...
Ranger does not answer their phone or return voicemails. I called the number on the online parts department page. Seems to be normal since the buy out. I've done some research and talked to a few who...
My transom is separated at the top cap section. The rest of the transom looks good and the only movement at the separation is when the motor is tilted all the way up and you push on it. It moves...
Do you mean the 83 or 200 kHz? In this case, I usually have them opposite of each other to eliminate interference anyways.
This is what I'm thinking too, thanks for the advice! I'll check setting first before I move things around, but leaning towards your recommended adjustment.
You're making your own joke apparently. They make jack plate mounts for structure scan transducers I just thought $200 for a mount was wasted $, so I mounted it to the jack plate securely. The...
Are you all preferring to the 2d transducer? That is flush mounted to the hull where the previous transducer was to prevent more holes in the hull. The 2 in 1 structure scan is mounted to the jack...
Thank you all for the responses! I will look into all ideas. I mounted the 2d transducer in the same location as the last as I did not want to put more holes in the hull. This is also why I mounted...
I have a Lowrance elite ti2 with a 2 in 1 structure scan Y cabled to a standard 2d transducer. This is on a 98 Ranger R91. Since I installed this I cannot get a 2D reading on plane. I made sure I...
I have a Lowrance elite ti2 with a 2 in 1 structure scan Y cabled to a standard 2d transducer. This is on a 98 Ranger R91. Since I installed this I cannot get a 2D reading on plane. I made sure I...
Unboxing this and mounting I found the quality to be excellent. It was very easy to mount, but the holes were different compared to my older models. Comes with a built in bounce buster plus a spare....
I brought mine in to the service center around August and the new L board arrived in October. Control board K was the original problem and the "fix," model is board L.
Looking for a 2018 (or equivalent) Talon extrusion bracket only(no hardware). It's the bracket that is directly bolted to the talon. Mine has 5 adjustment holes. Preferred shipped to arrive(Maine)...
Looking for a 2018 (or equivalent) Talon extrusion bracket only(no hardware). It's the bracket that is directly bolted to the talon. Mine has 5 adjustment holes. Preferred shipped to arrive(Maine)...
Thats the plan. I'll keep you posted.
I don't have domed decals and I've reached out to Iguana already lol. They informed me if I wanted factory original I wouldn't be happy. All I want to know is if the site I asked about has been used...
I appreciate the help, but my originals are not domed and every other graphic company can't duplicate factory original. I was just asking if anyone has used replacementdecals.com as they along with...
Yes for my R91. My decals are not domed and those ones look different. Great lakes skipper doesn't carry my model. The only two sites I can find for original is replacementdecals and outboarddecals....
I'm looking to replace the decals on my Ranger, but Ranger parts no longer sells them. I noticed a web site called replacementdecals.com sells them and they look like factory original. Has anyone...
Right, I never hit anything real hard and when I did hit I wasn't above 5 on the speed dial. Hope I don't find myself in a sticky situation when I do hit something hard.
I thought Motorguide gave you that answer about it possibly being a wiring issue due to corrosion or wire gauge? I know you said yours is good, but maybe it is a bad plug, breaker, or a battery...
I did a tournament yesterday and fished shallow a lot. I bumped the motor a few times on tree limbs and hit bottom a few times. The motor never shut off, so hopefully that's a sign my wiring is good...
Luckily I have a talon, but this does seem like something I'll be swearing about in the future. You would think this would have been smoothed over by the pro's running the prototypes. Maybe they can...
I think this happened to me(bumped a stump) on my first time out with it a few days ago and I didn't realize it. However, I hit the constant button on and off and it performed like normal after. It...
