Search:

2005 Mercury 250 XS
Serial # OT998584

Hello,

I'm having an oil issue. Oil level dropped in tank under the cowl and caused an alarm on my Smartcraft Gauge . I had this issue back in the spring...

If it was a 24 volt I would take it.

Motor worked perfect, then it would not work when I steered right or forward. It would work steering left or back, which makes no sense. I then used constant on switch and speed control knob as the...

I changed the switch on the shift linkage on the powerhead and it seems to have fixed it. I also rebuilt the poppet valve and cleaned the filter on the cooling line for the air compressor while I had...

I just repaired an issue two weeks ago please see this thread: http://www.bbcboards.net/showthread.php?t=1103854&highlight=

Ser # 0T998584

This past weekend motor ran flawless and has been...

I installed a new water water sensor in the bottom of the vapor tank and fixed my problems. The sensor was very hard to remove. It actually broke off in the tank in the removal process.. I drove flat...

Ser # 0T998584

Idling out this morning, experienced rough idle. Started back to the ramp and throttle surged on it a few times. I shut it off, cranked it again and it was idling way too...

Blake.... Are you sill out there........ I still wanna race...LOL

Does anyone know how much this kit is worth now? I paid like $400 for it a while back. This one has a Yamaha part number.

Thanks for everyone's input. The retaining nut came out fine. The carrier has some metal loss but it did not get into the first seal. I removed the carrier and dressed up the damaged area. I...

I did not torque the nut. I actually used the yellow plastic wrench to tighten it so I wouldn't think it was much over 55lbs.

0T998584 is serial number. The hub is several years old.

http://www.bbcboards.net/attachment.php?attachmentid=322979&stc=1http://www.bbcboards.net/attachment.php?attachmentid=322980&stc=1

Here is the Culprit..... I thought this heavy duty hub was...

The problem with asking this question to the seller is that most sellers on Ebay have no clue about the items they are selling. Don I would be glad to purchase what I need from you if you carry...

I want to add a Smartcraft Gauge to my 2005 Merc 250XS. Will this one work?

...

Thanks for the suggestions I think I found someone.

Did not get IM

I am definitely talking about carpet in a bass boat.... Mine has the sewn edges and it would be great have the new carpet sewn also. I was hoping to get some testimonials for someone local..

I'm looking for a reputable carpet installer Preferably in NW GA. Boat is a 2005 Blazer 202.

6 month old X5 cutting off after contact with a silt bottom or thick weeds for 5 or 10 seconds. Direction arrow light works but the motor does not so I know it's not my circuit breakers. Someone told...

Anyone thinking about upgrading to an X5 from a Tour Model with the metal pedal? If so you will be very disappointed. The new X5 pedal is plastic and is cheaply made. I've had my X5 for four months....

The one on Bass Cats website doesnt look like its deep enough. Mine holds 7 Plano 3700s standing on their end.

Tempress.Com has some similar ones but I would really like to get an exact replacement.

Does anyone know where to find ths divider? My boat manufacturer has them but they want an arm and a leg for them. I would think this a generic storage divider used on other boats and can be...

I need the plastic insert that holds the Plano tackle boxes on a 2005 202. Are these still available?