You should pull your tracker valve and check it for tears. Mine did the same thing last year. Your tracker is on the right and fuel reg is on the left. My tracker went bad then a month later the fuel...
Type: Posts; User: BlazerVA
You should pull your tracker valve and check it for tears. Mine did the same thing last year. Your tracker is on the right and fuel reg is on the left. My tracker went bad then a month later the fuel...
I have been through the same thing numerous times. You probably have debris in your cooling system. Pull the strainer (port side)and both thermostats. Hook the hose up to it and flush it out for a...
I've been running one 36v 50 amp Lithium Pro with a charger that jumps from the cranking battery to the lithium. I have never had it die once and I fish heavy tidal rivers. When you run the big motor...
Region 8 is going out of there also on the 23rd.
I'll see if I can get out there this weekend if the wind will calm down some.
Not sure about prop height. I dont have a gauge on the boat. I bring it all the way up and go then drop it down a few seconds on plane and go from there. For reference this boat is the demo boat...
6200 is about as far as I've pushed it. Thats with a full load. What do you think a SM would do with 1.62 gears?
I've gotta TM. Thought about getting a SM but where I fish its mainly 1-5 ft deep and loaded with grass. I clean the thermostats enough as it is. I'm in SE Virginia/ NC
I've been running a 625 for a few years now. My current setup is a 300xs, 1.75 gear case, 12'' hydraulic jp and a 29p Bravo xs. I get right at 80mph loaded with 2 grown people. I've ran a 27p promax...
I get no bottom signal but at 75mph I still have depth reading. The only transducer I could get to work was the Garmin one you fill with anti-freeze.
Go Munden Point to Waterlilly if youre gonna do it. might be 20 minutes. You can run up into Back Bay from there also in 5-8 minutes depending how fast you run.
Grab a crankbait and start hitting the wood. Westneck and Pocaty have a ton of it. We just fished a tournament on the North river Saturday and 17# won. They havent gone anywhere.
Hard Pass on that one bud
Ive got the same battery but has different different continuous amps. Its at 100.?
Has worked great for the past 3 years. I fish mainly tidal rivers and have never had it die.
465132
I've been running one 36v Lithium Pro 31 series for 4 years now and have never had any issues with it dying. I fish mainly tidal rivers around here. Saves a lot of room in the bilge area with one...
Try Brucato. I had them do mine on a rebuild I was doing. Theyve gotta good web page thats pretty detailed on their services.
Its actually bad for your motor to be at WOT and 1k rpm's low. Youre burning the same fuel and putting more stress on the powerhead. Surprising you only lost 2mph with being 1k rpm's lower.
31st has a Region 8 open. predicting 80 to 100 boats out of rt 5. Just a heads up.
I just put one on my 126 Garmin and it was the easiest thing to do. Now i gotta get another one for the console graph.:thumb up2:
Is it the actual pump or does the jackplate need to greased? It'll squeal pretty bad if its dry.
THIS ^^^^^^
I ended up with one 12 inch. Even in the shallow water you can use the livescope to see where the break is.
Try taking out the memory card in the unit at the console. Thats what I had to do with mine. I have a 126sv w/panoptix at the bow and a 93sv at the console. I ran a ethernet cord from the 126...
Does anyone make a foam flooring for the 625 single console. my carpet has started popping up in the floor. figured i'd go this route.
I actually took it over to a Merc mechanic since I didnt have the tool to reinstall it. They checked injectors and both the rails. Was told changing the tracker valve wasnt a big deal without the...
got through. they told me to call carver since they cant get the covers themselves right now. everythings backed up still.