Search:

Is there any truth to the rumor that connectivity between Garmin and the MG Xi5 is in the works? I heard something was on display at Icast. I am thinking about upgrading and if Garmin will work to...

He is talking about the anode/fin above the prop. You can cut the fin off and run it or you can buy a flat anode with no fin or half fin to clear the prop....either way be sure to have some kind of...

Yes, try removing one more or both plugs and see how it does. If it is better you may have a shop fine tune it to get it better out of the hole and max rpm correct. If the 24p still doesn't seem like...

I found out today that it is not a Predator, I heard about the welded blades and I was sure it was cast so I had it checked and was told it is an old Turbo cast 3 blade prop....but still too much...

you really need a tack to get it propped correctly, need to be running max rpm at WOT.

pull all the plugs out and try it, that should be better for the holeshot. you can get plugs with different...

Thanks, the A45 does but I can have pvs holes drilled at the prop shop. The A41 is basically an A45 with no vent holes and a fixed hub so I am leaning toward having the holes drilled in it and...

I use a trollbrige module to charge all 3 batteries from a 12 volt 2 bank on board charger, also charges all 3 from the motor when running and will charge from tow vehicle if you add a trolling motor...

23p Tempest A41 and A45 w/no vent holes, thinking about having vents drilled in one of them OR have 24p Predator repitched to 23p?

18.5' Nitro pre Tracker, hull is same as Skeeter Starfire, 2.0L...