Need the whole ball of wax. Boat has the 20 feet hull. I have no idea how long the cable has to be. Anyone know? I had the old set up yanked out of the boat and in my farm shop. somebody just threw...
Type: Posts; User: Crappiefarmer
Need the whole ball of wax. Boat has the 20 feet hull. I have no idea how long the cable has to be. Anyone know? I had the old set up yanked out of the boat and in my farm shop. somebody just threw...
You can also try separately, greased lightning, and shout. they may not work as good now that you have already cleaned it once. That last little bit will be the hardest to remove.
Used it on my old stratos years ago. Worked great.
I would not buy one unless it was the original owner and they had ALWAYS kept it in the garage. I just got through rebuilding a 92 Javelin 409. New floors, transom, front deck and wood under the rear...
Never heard of a T DC. Do You know what the difference is between Yours and a regular DC? I have no other identifiers on the boat other than the 409 sticker and on the inspection plate the same thing...
You would have to remove the motor to remove the cap unless there are no motor mount holes in the top cap. I would still yank it anyway to get it out of the way.CF
Sell the motor, Sell the trolling motor, sell the trailer, boat comes with the trailer. You won't have to deal with scraping the hull. Somebody may need a trailer bad enough to take the hull off Your...
I don't know if it was that or lack of sanity! lol!
So far so good but have not really put it to the test yet. Will soon. Thanks for the kind words. It was fun. painstakingly slow at times, frustrating sometimes but over all, I enjoyed figuring out...
Thanks man! So far I am really liking this hull. Can't wait to see what some real ponies will do on the back side of her.:thumb up2:
Here is the link to the thread I started on this project. Too many pics to repost here. Put in new floor, transom, front deck basically all the old wood had to be replaced. check it out if Your...
Here is a link to My restore. Would take too long to post all the pics here but put in floor, transom, front deck, and more. Check it out if interested.
...
I have read and heard that something in those diesels is breaking in the bottom of the motor around 100,000 miles. Ram rushed to get this product to the market. That is never good. this is not a...
Yeah, sucked for me too. Been scraping by for 3 years now on low commodity prices farming. Then got flooded out from hurricane Mathew. Abandoned the house that night with my Wife and Daughter. Lost...
I would take the top cap off and tear it out the old fashion way. tried and true. No wondering. It gets done right the first time. Tear that stuff out with pry bar, gasket scraper, reciprocating saw,...
You need 60 degrees or better for at least 4 hours. Or get ready to wear out a hair dryer to build the heat into it to kick off.
If it doesn't work, a crow bar, reciprocating saw, a gasket scrapers will get it. The fine stuff that is left right at the hull, can be removed easily with a wire wheel on a drill.
2wd drive to me is just a trash hauler. seen them get stuck in wet grass. if You have a weak motor, the low range with 4wd will save the motor and transmission on a steep ramp. Seen guys at the ramp...
I wonder if toolbox liner would hold up in the boxes and a little patch on my front deck to lay rods on? I have a bed liner material instead of carpet.
Going to mount the transducer on the jackplate for SI. Need another ducer to shoot through running at speed. Do they have a split set up for this unit or would I just have to unplug one and plug the...
starbrite hull cleaner. get you a windex bottle. spray it on full strength. it will take the brown stain right off with little to no wiping. hose it off real good. Then detail, seal, wax with some of...
Could silicone be used in the place of epoxy?
I don't know how fast it will push you but I know where I live the commercial fishermen use them and 4 stroke Yamaha's. That tells me all I need to know.
http://i1373.photobucket.com/albums/ag382/Crappiefarmer/IMG_20161205_125524011_zpskxzd2ovw.jpg
Old Hi Jacker plate. Will an L bracket work on this jack plate for mounting SI transducer. Got a 3...
http://i1373.photobucket.com/albums/ag382/Crappiefarmer/IMG_20161205_125524011_zpskxzd2ovw.jpg
Got an old Hi-Jacker jack plate. Will a transducer saver L bracket work on this plate? Got the slots...