Had a little time to mess with it tonight. I stopped by my local merc shop and they printed out the info for me. Did the sync and link then checked timing I get 4 at idle and about 23 at wot. My idle...
Type: Posts; User: 09merc75
Had a little time to mess with it tonight. I stopped by my local merc shop and they printed out the info for me. Did the sync and link then checked timing I get 4 at idle and about 23 at wot. My idle...
I'm waiting for my Manuel to come in. Is there anywhere I can download one? Trying to get it done by Thursday.
Thanks I'm going to set it all up again and see how it idles. Also when I pulled my plugs I noticed that there was barely any fuel on them they almost looked brand new but there was fuel. I went and...
Just got time to look at the motor. I got the miss fire solved after 2 new switch boxes. Now I'm trying to set the timing since the module was removed many moons ago and I doubt they set it back up....
I swapped the switch boxes around and still had the same issue. If it was the box I would think the issue would go to #5
Yes I swapped the coils and still had no spark on #6. I pulled the small black ground wire and cleaned the ends and where it bolts to the block still same issue. How much power should I see at the...
I got 13.67,14.2 and 11.45 on all three test
I will check it when I get home. If it was the trigger wouldn't I have more than one cylinder with no spark?
Have not checked it. Do you have a spec sheet on ohm readings?
Stabilizer is gone not sure if they set timing or not. I removed the small black ground wire check and cleaned the connectionsame. Still same issue. Also had both ends removed when I haventured the...
I made a quick jumper to go from the switch box to the coil on no 6 still same problem
Still having this issue with no spark on no6 cylinder. So far I swapped the switch boxes same problem same cylinder. Next swapped the wiresame from the no4 coil and no6 coil at the switch box the...