was on the phone 2 hours today no rep replied, if i could speak spanish i'd call mexico where the junk is made.
Type: Posts; User: redbeard55
was on the phone 2 hours today no rep replied, if i could speak spanish i'd call mexico where the junk is made.
Guess i'll put it on a press just gamble on what gives first pole are base, just trying to save a franklin.
Seems like every other thing on a bass boat are designed to throw away if they brake, just...
sounds exact to me, 400 pond load especially if the water is not cold i could only do high 60's, with the same rig, they need some slim fast.
My rear springfield pedestal top nylon bushing has broke and pole is wobbling, anyone know how to take the top base off are the thing apart so i can replace nylon bushing? gas cylinder still doing it...
Mine is 4 years old with plug in 30 amp fuses checked already, you pull one side neg are pos and bank goes out, tks pal fixing to pull the trigger on a noco 4 bank, 15 amps are too much if not...
so much for no politics on bbc
my last ranger i went to a tractor trailer supply store and bought plastic air hose that they use on trailer brake system, pull out the rope and pop the plastic hose in the slot, you can also get...
Yea you need to talk to champion man on the omc forurm
does anyone know who can repair these chargers? seems to me nothing but diodes capacitors a board and transformer, mine suxs out of warranty and shops i've talked to say through it away and buy new,...
I put mine just right of the console on the flat spot of my 521 l didn't want to drill a hole in the cap, already had a hole from a previous depth finder by the console, i hear you can put it up...
Lot of work there.your going to have to flip the boat over grind all the old gel coat off, clean it up with acetone, needs to be re glassed, they make a more flexible resin, not the hard glass in...
I recently put a point 1 antenna on my rig, running 2 gen 2's a 12 t and 10 on the front, i calibrated the front depth finder with the trolling motor as suggested, after it read cal OK, my t 12...
wet sand them an respray with clear gel coat, then re-clear, the clear is what cracks on most.
thought it was more like 600 plus 100 plus shipping i'll fix it myself, spot is only A FOOT LONG and a air brush with paint and flake can't be that difficult, got an estimate from picture was...
some jack legged yoyo back in to my starboard fender busting the lower front corner, question is off hand does anyone have any idea what the price of a tandem axle fender sales for??
I bought fscsx this is a five star fund from fidelity have had it for 10 years it's split 10 to 1 a couple years back an covers all the top name tech picks. and it pays a ton on the gains once a...
Have had nvs for years it's slowed a little on it's over all price staying just below 100 but they pay such a great dividend it made me hold on to them for the long haul
Does anyone know where the start up horn is located on a 2014 521c, mine quit working, i don't miss the beeps when cranking but system check reads no audible alarm if motor malfunctions.
The system check states i have a fault stbd horn,the one that beeps when cranking the motor, i definitely don't miss the noise but it states no alarm, beeps if motor malfunctions, i have 2014 pro xs...
i got a 2014 optimax pro xs 250 my system check reads stbd alarm for horn not working this is the beep beep that comes on when you crank the motor...the problem is it also lets you know if there is a...
Bought MJ a mutual type fund with about 6 or 7 top pot stocks an aurora canadian stock made good money sold, then bottom fell out, sold high an have re bought Mj at 5 something an MJ 2 weeks back for...
Bought MJ at 4.00 a share and sold for about 4.000 profit, re bought a week ago 300 shares at 5 something, mj is a mix of about 5 are 6 different pot stocks, kinda like a mutual fund also bought...
got a 999 hb with travel cover and a 360 transducer for sale, don't know the value, no transducer for 999, lots of hbird acc such as interlink box with 7 hook ups two mounts one is the large ram...
I had to go to 71/2 turns once i redid my bowls on 98 f/s 175
when i redone my bowls i went out to about 7an a half turns on screws 98 f/s 175