No failure of equipment.
Type: Posts; User: chad202
No failure of equipment.
These are my voltage checks. Fully charged battery: 13.4, voltage at fuse block going to each unit: 13.2, voltage on console: 13.0, voltage at bow unit, 12.8. Don't know all of these at the end of...
How much voltage drop can one expect at the end of a normal day of fishing? Running a 125AH Ionic for motor and electronics. I have 1-10" solix and 1-15" solix, both Gen1. Humminbird and MinnKota...
If I'm gonna catch fish at this spot I'm going to.
And I would need at least a G3 solix to run Mega360?
Gotcha, good info, thanks.
Will do, thanks.
My 10" solix is a g1 and doesn't work with Mega 360 but that's okay cause I use it for mapping/2d/si/di and want it to stay that way.
Wayne, the apex cause of it's clarity or more functionality?...
Not looking to link it with any other unit and it's sole purpose will be strictly for 360. What unit is best and I'm okay if it's a 10" as I currently have a Solix 10" on the bow.
May be totally unrelated but I've had issues with my Solix G1 doing crazy stuff like zooming on it's own, acts like someone touching the screen, locking up, etc.... I tried all mentioned above and it...
I made my own with poll noodles, rope, and heavy duty suction cups. Only used them once and they worked great. Mostly just use my PPs.
They just give you the option. I like the motor powered up cause I trim down to stow the boat and they back up when I go fishing. Makes it easier.
I have a 2018 721 with upgraded wiring which I believe is standard on the 9series. My motor stays powered up with the perko switch off cause the wire is connected straight to the battery. On the...
Glad you got it figured out.
Yep. This is what I prefer. In real life, the boat is moving, not the ground so that how I want my map to be.
What about a FFS circuit and a non-FFS circuit?
You should only have a black and a red wire going to the motor. Under the bow panel you should have a 2-wire terminal strip. If you put your meter across those black and red wires, you should have...
12.5V will not run a Ghost. Need 24V or 36V. Bad battery?
My Gen1 solix has the 4.19 and yesterday I tried updating to the 4.21 but the screen just went blank. Powered it down by killing the master switch as the power button didn't work. Powered it back up...
Yea, 100lbs is 100lbs. :doh:I didn't think I was confused on that. Glad you enjoyed watching it.
I don't think it had anything to do with people wanting to watch fishermen's heads down looking at graphs. It was the hype leading up to it and people believing that the stars were aligning for it to...
If the water level is well above the overflow hole, then it's aerating too much. If the level is at the overflow hole, then you have a hose disconnect where it comes out the top side of the livewell....
You can adjust the amount that the aerator dumps into your livewell. The adjustment is on the discharge nozzle. I suspect yours is too open and it's filling the livewell to the seam of the topcap. ...
The shallow bite was there, just not south.
How do ya'll tune for trying to find bass in hydrilla flats? The only thing I think I didn't try was changing the frequencies. I tried different pallets, sensitivity, contrast, etc... Would dropping...