I have a helix 10 with the mega plus transducer installed in my tolling motor and lately I get a intermittent green static on the left and right side of the screen in 455 side scan. Also during this...
Type: Posts; User: The gman
I have a helix 10 with the mega plus transducer installed in my tolling motor and lately I get a intermittent green static on the left and right side of the screen in 455 side scan. Also during this...
Can you bottom lock downscan on a humminbird. I can zoom in on my lowrance carbon when jigging for walleye and see I can get into a downscan screen on 2d sonar and was hoping to build a screen that...
As the title says if I hook both helixs up to the box I can control ulterra from either uni but willnot spotlock but if I disconnect the 10 all is good. Both units are gen 4. Any suggestions.
I am usually scanning 100-150 feet.
I am running 3D with 18,4,123 and thought it was great until....I am running humminbird on a solix with mega+ and running the humminbird on 455 sturgeon show up a lot further out and are crisper....
Does anyone know why I have a blue circle on my humminbird solix map. Any idea as it is right in my good fishing area
I will post this here also. Boat came in second hole, moved it to first hole and no more prop chop, didn’t lose any speed either
My 115is on a 2021 pro team 195 , I dropped the motor down to the lowest hole and got rid of the prop chop and lost nothing on speed.
Thank you msupc that is my next step. Every prop I have tried has this prop chop at some point with the motor in the second hole but I have read that the 4 blades work mounted higher. At 4 inch pad...
New pro team txw 195, motor mounted in 2nd hole, pad to prop 4 inches. At about half throttle and adding trim motor shakes as though it has a plug Miss. motor runs great at idle and at wide open and...
Took the boat out today and ran my x7 prop, 3 blade 21 pitch prop and the black max 21 pitch that came with the boat. X7 19 ran the fastest but the two stainless shook the worst. I have come to the...
My dealer is 2 hours away and other dealers say 2 week wait
Installed a new spitfire on my 4 stroke 115 and thought I had,have a motor problem. The motor runs great trimmed down and trimmed up for speed but would shake like a miss in the motor at midrange....
My 2020 tracker with a 115 and a spitfire x7 19 pitch does the same thing. Could dropping the motor help this condition? It is mounted in the 2nd hole at 4 inches pad to prop.
I have a new 195 that my 115 is set in the 3rd hole and my pad to prop is 4 inches. Does anyone know what the pad to prop is on a 190 that is set in the 3rd hole. Different transom height so don’t...
That is what I was trying to figure out, thanks bassfisher, I have saw a lot of 190 owners running there 115 in the 3rd hole and now I see a 190 in the 3rd hole is 4.75 on your 90. I figure if the...
That’s gps speed. Still think there is more, just wanted to see if any 195 owners had measured the pad to prop.
Might be obvious to sum but I found if I was in the boat, boat leaning to one side, it would put my side ay from bumk
Have a new 195 with a 115 four stroke I have a spitfire 19 pitch ss prop on. Boat came with the motor mounted in the 2nd hole from the top and The pad to prop is 4 inches. I see that a lot of 190...
Been searching for sturgeon and have come to the conclusion that the flesh of a sturgeon doesn’t give a clear return but the shadow is the give away. Is this the correct way of thinking? This is...
The motormate does nothing to Take the load of a motor torque off the transom. It just takes the shock off the tilt cylinders. I will not tow a boat with a outboard without a transom savor that goes...
Studied the manual a lot, if it wasn’t or for the mega, which 3D is close tI as good, this unit would be sold.
Thank you, have 8 wire already, hitting the boat icon so works, just wondering why with these expensive units
Bought a solix 12 to run beside my Lowrance carbon with 3D to compare side scan and so I could link to my ulterra. So far I am not impressed and wonder if I am doing anything wrong. On start up the...
I am running a Lowrance carbon with 3D on the back and have a transducer stick with the gen2 hummingbird transducer I run off the bow and just bought a ulterra with the side and down image transducer...
