Possibly the oil sending unit? I'm just spitballing here.
Type: Posts; User: Brob52
Possibly the oil sending unit? I'm just spitballing here.
Engine temp was fine. Stayed at 147. The only alarm it threw was oil level critically low. I called a local shop that used to work on evinrude G2s and they said that quicksilver could be the issue...
It was but while I was idling through some shallow stuff, but I had been running for a while on plane when the alarm went off and it slowed down. Just drained all the quicksilver out of my reservoir....
It was but while I was idling through some shallow stuff, but I had been running for a while on plane when the alarm went off and it slowed down. Just drained all the quicksilver out of my reservoir....
I know the requirement for my 2016 etec 200 HO is xd 100. Thats all I ever used. I order 3 gallons at a time and it was taking abnormally long for it to come in this time. I really needed to pre fish...
2016 18TRX 200 Evinrude HO
8" jp 26 fury prop
With current 75.4
Against current 73.1
Full tank, left livewell half filled, me(250), and all my tournament gear
Thats was the only problem man thanks for your help!
Ok im gunna check first thing in the morning and get back with you on here. Thank you for your help
That one and the one on the dash. Both read zero. Numbers on the one in the pic are black just reading zero
427180
Its only the second time I really got to run the boat. The psi was at 37 pounds wot all day.
Well what I'm saying is I have the usual dash meter that shows psi but its also connected to my graphs and my evinrude smart craft gauge. I can see it in 3 different places, but im not sure if it...
Both gauges and its a G2 motor.
I'm taking it out this morning after flushing it thoroughly at the house
Thanks, will do
My water pressure gaugestarted reading zero yesterday as I was heading back to the landing. Normally runs about 35 pounds WOT. possibly trashed sucked in? Motor still pissin. Motor temp between...
I know, I was just curious.
Has anyone tried an 8" or bigger jackplate on their trx? Im replacing the 4" that was on there when I bought it and the plan was to get a 6", but I was wondering how an 8 or 10 would affect the...
I'm taking it to century marine. They said I either have a loose wire somewhere or a bad seal let water in the gearcase and caused the sensor to malfunction.
10-4!
Thanks for the info, I replied back
I had to be towed back to the landing today because when I tried to crank up I kept getting a 201 error code. I tried undoing the battery cables to reset and it cranked up so I shifted forward,...
Thanks man that's good info. Going to tinker this evening and see how she does
thank man. How many rpms you turning.
yea man that sounds good. Im probably gunna be paying with it next week. Where do you usually launch at? We can take both boats and you can drive mine and see what you think too
10-4 buddy those are good numbers. If I could get to 70-71 with just me I'd be happy. I fish a lot of evening derbys on the tensaw River so speed comes in handy for sure