Thanks for the info, my lower is in good shape was just wondering about the gears Thanks Again Perry
Type: Posts; User: camarojockey
Thanks for the info, my lower is in good shape was just wondering about the gears Thanks Again Perry
Hey all i have a 2018 250 verado pro #2b478760 just curious boats.net says there are 2 gear cases available 1 with 1.85 gears the other with 1.75 gears how can i tell which i have??? Any help...
I have an 18 625 with a 18 verado 250 running a 28 bravo stock 2 people tourney loaded 85degree water temp and 100 air temp will run 76 down here in texas
turning 6150rpms revlimiter is 6400 on my...
if you go with a sho they have a jackplate mounted ladder that can be added
that is correct the 190 and 202 are similar to the bullets. The 595,625, and 650 are completely different hulls they are new designs nothing close to a champion. i do know basscat bought the...
really good looking boat congrats and welcome to the family give us some numbers with that suzuki when you get some
i PROMISE YOU WILL love the 625 ive ridden in skeeter, triton, ranger, owned a javelin and now have an 18 625 with a verado pro4 250 the ride is outrageous as far as big water and it really loves...
ihave an 18 628 with a verado 250 running a 28 bravo 1xs 2people 30 gallons fuel full lives wells 76.6 solo was 78.7 with some left in her motor was still in break in only have 4 hours on a new...
youll probably want to stay with the yamaha or go to a bravo for holeshot. my boat was in thy same shop when you picked up yours (power head replacement) speedwise, you should see 81 to 82...
move the batteries to the outside of the batterhy box and put the pumps closer to the driver side of the middle. that is how mine are arranged 2018 625 as far as the prop i would say a 29 might...
The blazer plant is in pensecola. Try and stop by and see the place. I have a 2018 625 and it is awesome.
if you ever get to the dallas area send me a message and ill take ya for a ride in my 625 with a verado 250pro. It will be a couple weeks before im available as haveing some work done on the verado ...
i think it is 6 inches wider and 1 ft longer
go to the blazer boat page on face book and look for Chris Williams hes the rep for blazer for the region
2b478760 2018 pro 250 not sure if i asked before but what should my water pressure be at wot?? thanks Perry
I got my 2018 625 from an flw tour pro, had it about 4 months and yes the fit and finish is top notch like the other hand laid hulls(allison, bullet, stroker) From what i can tell blazer stands...
I love my '18 625 and my son is friends with Chris Williams and he says they are outrageous
Good for you Gary hope you enjoy it as much as i have enjoyed mine so far, bhy the way mine is on the way to pensecola to have the hull repaired by blazer
i got it now screw up on me didnt put enough oil in to check the stick realized and added correct amount and it is just below the 1/2 mark in the safe zone Thanks Guys
i also have a 27 bravo that has been worked for a blazer specifically only 4 holes plugged with one solid that prop will hit the rev limiter easily it pushed the boat 7303 with 3 big guys in it ...
motor is on the top hole of the jack plate and mounted in the second hole from the top on the motor
GWK what prop are you running on the sho???
yes tried on 10 thru 14 on take off about the same
i can turn the 27 bravo up to 6200 rpm the most ive trimmed it is about half, and at that point it throws a tail about 3ft above the cowl most of the time we run at about 3/8 trim witht he jack...
hey guys 2018 250 pro verado 2b478760 just changed the oil and filter put in 7.2 quarts started it up let it run for a few till reached 130 then checked dipstick
nothing shows on the...