Search:

Hey Mike check this out. they have it in 4 and 8 hookups... looks pretty easy

...

Thanks Mike for all the good info! I ended up buying a Sitex MDA-2 Metadata Dual Channel Parallel AIS Receiver, and a vhf splitter.. I need to measure the distance from MFD to my electronics box...

Hi Mike thanks for the reply... I am under the assumption (you know how that goes) that with an AIS I can 'target' my friends boats as long as they are throwing out an MMSI. So if five of us go out...

I realize that most of you spend your time on the lakes, but this is the only place where I have seen this much information on these humminbirds.

I do spend some time in the salt water and like...

forgot to mention this is on ears.

2001 yamaha 200 hpdi

new thermostats and poppit ...

yds shows 126 port cover 121 starboard cover 90

took starboard thermostat out and boiled it in a pot of water and opened at 120
any...

414374

The main relay and the driver relay doesnt like me borrowing the ground from the VST fuel pump blue wire. when the carter has power to it these relays start clicking and dont stop. I can turn off...

Okay, thats the way I have it. I was thinking about a way to come up with a filter minder. with the pump before the main filter it would have to be a pressure gauge installed on the outgoing fuel...

Are you guys placing the pump before your main fuel/water separator filter, or after?

Update:

Tapped the vacuum ports with a 6mm and ran bolts in covered in grey form-a-gasket.
Used the Blue wire (ground) from the VST fuel pump to trigger a fuel pump relay. carter fuel pump...

Connector part #68F-14247-00-00

If you look close one end has a cut out.. The only pictures I can find have the oring sitting on it and cant see either end.

Thanks so much

I am going to use a relay to do this, what trigger wire did you guys use for the relay. I was looking for something to where when the motor was running this pump would run and if the motor is off...