We were just scanning a point so it was probably about 5-10 minutes of on and off use on 10 when it popped. We had been using it earlier as well so maybe the heat just built up throughout the...
Type: Posts; User: txred0810
We were just scanning a point so it was probably about 5-10 minutes of on and off use on 10 when it popped. We had been using it earlier as well so maybe the heat just built up throughout the...
Batteries show 12.88 each and connection after breaker is 25.6.
My father recently installed new group 27 batteries on his xpress x19 and now he is having problems with his 60 amp breaker blowing when running at max speed for a continued amount of time. The wire...
Have heard a lot of people praise Sartin Marine. Didn't have the best experience with Yowells in Waco.
I believe that wire was 16 gauge if I remember correctly. Should have no problems fusing that with 10 amps. I would have preferred to use two timers for that set up and wired one to each switch. ...
Yes check the fuse. We replaced it with a 10 amp. The five amp would blow after a little bit of use. The way ours was wired up is definitely weird. They had it wired to where the timer was always...
The timer power wire goes to the main power switch on the panel. The brown wire from the timer is currently wired up to the Number three slots on the recirc and aerator switch. I can't see where it...
My dad and I are trying to correct some wiring issues with a new xpress boat. It looks like the timer is wired on both auto switches for the recirc and aerator. The manual works on both switches but...