Search:

Mark blueprinted my prop and now I understand how much the prop can change the performance. Top end is now 53-55 but that isn’t the real change. The boat pops on plane quicker and I can take off in...

I sent my prop in to Mark for some work. Will report back results when I get it back.

So I think I am finally able to give some valuable information.

adjusted Prop to Pad to 3.75, I was at 4.25 and actually started almost 1 inch lower than that.
Just under 1/2 tank of gas
5...

What do you get for top speed? (I don’t have the Pro XS so might not be fair comparison). I remeasured today and was actually at 4.25”. I set it to 3.75 and need to get out on water to test. Do...

Just measured prop to pad and I’m at 4” provided I measured correctly. I looked at the post that shows the pictures and is it correct to measure the center lowest point for the pad? At a full tank...

I will give that a try. I am using gps speed and water pressure doesn’t seem to drop. Playing around today it’s very interesting that my hole shot seems really good, the bow doesn’t come up as...

Hello, I will have to get the prop to pad height. (I’m at a campground for the week and have the boat at a dock. Not sure I want to give up fishing time to pull it out and measure until this...

Anyone have a 189trx with a 150FS? What kind of speeds do you get. I run right around 50mph and think I might need a different prop. I have a Tempest Plus P21. I don’t know a whole lot about all...

Ibelieve it’s the regular with 1.92. I gained a couple mph at the height I’m at. If I go higher rpms go up with no speed increase.
yes I have a jack plate. (Z Lock Pro Hi Jacker)

I have a Triton 189trx (2016) with a Mercury 150FS, Tempest plus 21 Pitch. I only get about 50 mph. I raised the motor To a point where my rpms started climbing to 5900. I still have great water...