Thanks CM, to adjus,t so as to make the throttle bring up the rpm sooner for a given advancement of the throttle, facing aft, would you adjust the trunion knob clockwise, or counterclockwise? Thanks,...
Type: Posts; User: prawntrap
Thanks CM, to adjus,t so as to make the throttle bring up the rpm sooner for a given advancement of the throttle, facing aft, would you adjust the trunion knob clockwise, or counterclockwise? Thanks,...
Sorry for late reply. Thanks for the good info. Shift and throttle cable have been changed on both engines and its shifting good now. If I wanted to adjust the throttle cable so that for a given...
Model number J150NXEUC
I should also mention, its a counter rotating.
Hi,
I have my boat out of the water and doing some seasonal maintenance. I am having the shift and throttle cable replaced as it was getting difficult to shift, particularly in reverse. If I shifted...
It looks like it just has the selector for 5 or 6. I am not looking at it, but looking at a picture on line, i don't see a CAL pocket?
Ok thats good. Is that replacement Tach 0177107 a compatible Tach? Also any ideas why it would read low?
Thanks
I finally changed out the Classic series Tach 0176303 with a Tech series tach 0177107. I definitely fixed the errant check engine light I was having. happy about that and thanks for the help here....
Thanks Cm, these are the classic series gauges. The Tech series is pretty close and they still have those in stock. Can’t seem to find a classic series tach in decent shape any where online.
Thanks BM, will search around. No luck so far
I finally got down to the boat. Unplugged the vacuum switch and the same result. The check engine light stays on after the self test. I started the engine and it came on as well even with the switch...
That was suppose to be a thumbs up, lol
Thanks CM
Ok, that is good to know. I am not able to get to the boat for a few more days. Please post if that fixes your problem. I will also put the meter on it. Do you have to remove the fuel bracket to...
That sounds good. I will unplug the vacuum switch and see if it happens again and report back. Might a couple til I get down to the boat. That’s interesting SH about maybe the guage having internal...
The system check gauge that I have is the tach gauge, not the separate small one. I am still having the problem. My question is..if I turn the key switch to the run position and not start the...
Thanks for all the replys. It is the tach.I had replaced all my fuel lines several years ago and the fuel is stabilized. I am going to change the water separating fuel filter, just as a precaution....
For sure, have run the boat for 16 years and had a problem years ago with a anti siphon valve that caused the light to come on while under way, removed it and have never had a problem since. I wanted...
Hi All,
J150EXEUC. I went down to start up the boat and when I turned the key to the run position to allow the system check to run through its self test, the check engine light came back on. I have...
Sorry for slow reply. thanks for input. It was corrosion on the shift cable. I was going to try to replace it myself, but chickened out. Had a mobile mechanic that was recommended to me come by and...
Hi ,
Seems I have lots of maint issues going on, but working through them. J150EXEUC . When I first arrive at boat after it has been sitting for a few days, start it up and then try to back out of...
Had the boat out today and gave it a good run and the tach operated normally. I will keep an eye on it. I think there is still a problem in its early stages. I will update if it crops up again....
Ok, thanks, will check tomorrow. Going out fishing, will be able to give it a good check tomorrow.
Ok, will do.I am sure its fine but, will it be OK to run it with the VRO harness disconnected? I had it out for a run today and it still bouncing around, but only at a certain RPM range. Its ok at...
The bouncing problem moved over to the other tach. So not a tach problem.