I have a 250 HO Evinrude in good running order and shape.
I have a family friend that wants to buy the motor. What is a fair price? It will come with a spare (China) lower unit and all controls. A...
Type: Posts; User: TommyToon
I have a 250 HO Evinrude in good running order and shape.
I have a family friend that wants to buy the motor. What is a fair price? It will come with a spare (China) lower unit and all controls. A...
I had the 32 with the latest 20.0 Software on the Echomap 102SV and 2.58 on the GLS 10 Black Box.
I just installed the LVS 34 and new black box. My new black box is at 2.57 Software. Any thoughts on...
I did the same. But screwed a half hockey puck below the unsupported end which rests on the top cap slightly
Contemplating between the Dewalt DCB-210-10 AH 20 V Battery and the DCB-609 20/60V 9AH FLEXVOLT battery to power my livescope.
Does anyone have experience with either, I’m trying to understand if...
I’m about to order the Sealite and some 9-12 ah batteries to solve my livescope power issues.
I have 2 questions:
1) has anyone run both Dewalt and Miluakee and can comment on any difference re...
Would like to hear or see where others have mounted their Livescope or other Forward Facing Sonar black box and how you have wired it to the head unit. If I mount it in the starboard side compartment...
I purchased a battery disconnect switch off Amazon, one of the red ones with on/off.
This will be for my electronics only to isolate them on a separate switch away from my main Ranger installed...
Thanks. I considered that and may try to make a wooden template
I am looking to mount a third graph on my 520 C Ranger. I currently have the dual BBT mount on the bow and want to keep it but am looking for a way to mount a third graph. I was looking at doing a...
The mount was not entirely Boat Logix. And the fact that a cookie baking sheet was used to mount it didn’t exactly help
Wayne is the Goat
Have you tried DI. Usually just see like a tail on a boulder....
I use the black piece of foam that it ships with. I cut on either side of the hollowed out part of the foam and then cut slots on either end for the TM and 360 shaft. I leave it tight and wedge it...
I am betting it’s the Trollling motor too. I have an Ultrex which I believe is causing mine.
Thank you Wayne! I didn’t have it on “built in”. Everything is working!
Out on the water and now have 360 working with the Y Cable connected (not bypassed like before).
i have 2D working on the bow and it is coming from the trolling Motor transducer however I cannot...
All sorted out now I think. Thanks Wayne.
I had the 14 pin plug coming from the M360 connected to a 14 pin to 7 pin adapter (which is how I have my boat rigged).
switched that adapter out for a...
i have the 7 pin male plug connected to the Helix, however the other two ends are not as you describe.
The 14 pin Female plug (which is labelled as Mega 360) is connected to the 14 pin male...
I misunderstood. And ya from Canada eh...
So i have the same Y Cable that is shown in Post #24.
The long end of the "Y" is connected to the transducer port on the MDI Unit. On the other two...
Opened the second one and it’s also a 14 plug. Another kick in the nuts from Humminbird
I have another 9 M360 2DDI Y Cable here that I was planning on returning but may gamble and open this one to see if it has 9 pins. It looks different to me likely what is actually supposed to be in...
My 9 M360 2DDI Y Cable has 14 pins!
The M360 is plugged into the Helix 10 MDI Gen3.
I have the 9 M360 2DDI Y Cable.
I got reading some older posts, I didnt use the cable that came with the M360 because the plug from the MDI...
My friends boat is rigged as follows:
1 Helix 10 MSI Gen3
1 Helix 10 MDI Gen3
2 Helix 10 GPS CHIRP Gen3
MDI Ultrex
I just switched out the 360 for Mega 360 and can only get M360 to run...
Dynamic Contrast it appears can be toggled on/off. I’ve got it on and will try that.