Thanks, some good info there. Just wish they had some prices posted there. I'm sure whatever I find will be more than I wanna spend but the motor is running great, and I'd like to see if a SS prop...
Type: Posts; User: B Robinson
Thanks, some good info there. Just wish they had some prices posted there. I'm sure whatever I find will be more than I wanna spend but the motor is running great, and I'd like to see if a SS prop...
I've got about a 1998 Honda, might be a 99, 50hp 4 stroke tiller, kinda looking into getting a SS prop for it. Where should I look, and/or would anyone have one to get rid of? Thanks--
Oh, and while I'm thinking about it....where did you find said schematic? I usually use boats.net and I looked at several, none of them had that clip. Any chance you'd have a part number on it?
Until I saw the schematic you posted, yes, I was messing with it, and was somewhat skeptical. My motor is already being hesitant at times and stumbling, so I've been poking around looking for...
Thanks, that's the first time I've seen a schematic that actually shows the circlip. I could never find it anywhere before, and it sure looked to us like it didn't clip in at all. I could not see a...
Hey all, I have a 2013 9.9 high thrust kicker motor, and while cleaning the carb and getting into the plunger assembly on the fuel cup, I see in the bottom there is a C clamp just sitting there,...
Yup, I've learned much in the past 20 hrs. I have another head to put on, which was the goal of this whole job when I started anyways. Finding the roasted piston really shut things down. I talked...
I agree. It's not good. Can I still take the piston out now and sleeve it? I say that really knowing what sleeve it means, too, keep in mind. I'm far from an expert on this stuff.
Yes, new piston was installed because I bought it. I just wish I'd known enough then to say no, let's put a different head on. But, I also think if we would have, we'd still have the same problem...
456198456199456200456201456202As you can see, I show a pic of a decent cylinder, then show the one in question so you can see the difference in the ports on the cylinder wall. You can see the damage...
Alright guys, I'll try to shorten this 2 stroke story up. 2002 Yammy HPDI 200 is the motor.
Lost middle cylinder on starboard side a couple years ago. Piston disconnected from arm, so motor was...
Gotcha, thanks for that info. I could have it out on the boat and have the YDS on it might show the status while under way?
Hmmmm....this is some very interesting information. Because if I was missing two cylinders, I could definitely see how I wouldn't have enough power to even get it up on the trailer like I wanted....
I would say it's definitely not in limp mode. I can get 45, maybe up to 47 RPMs out of it before it starts cutting out and acting up. Top speed right now is about 37 on a good day, when usual top...
Yes, two sets of new spark plugs have made no difference at all.
I think I will put the other head on, what the hell, nothing to lose at this point.
I plan on looking at the injectors, seeing...
Aright, here's what we learned today on the motor....the neutral switch is working, as all 6 coils were firing. Took the spark plug wires off while it was running in gear, you could hear the...
That's a good idea letting the gas sit. I believe I'll do that tomorrow. I did change the fuel filter/separator which I have a lot of faith in keeping things clean. Most of the mystery filters in the...
The cylinder I had problems with was #4, middle starboard side cylinder. I just installed new mystery filters in the injectors, the pump above them, and am also going to look at my neutral switch to...
No problem. I found it pretty easy to work with for the most part, but I'm still having problems figuring it all out. Specifically what I talked about earlier in this thread. I've still yet to get it...
I found mine on ebay for less than $60 I think it was.
420796I may look into doing that. My cousin tells me the Quicksilver gas treatment is the best he's ever seen as well. Here is the pic of the O2 sensor mess. This doesn't show the massive amount of...
Hoping to find out more about this decarb job. I know one job that's getting done....took out the 02 sensor, and eeesh...shoulda been done a while ago it looks like. Chunks of black goo fell out,...
I just posted a thread on this a few weeks ago, check it out. A little bit of info there you might be able to use.
What exactly is a decarb job?
I don't know if I've ever run the YDS while the motor is running, so I'm going to try to get that done sometime just to see what else it'll tell me. I've done so much work on this motor....I'm...