Search:

Ok thank you that makes sense.

I installed a live 12 at my console which replaced a gen3 that i had the power cord with the RCA jack that my Aqua Vu plugged into, The live has an hdmi in and I tried a rca-hdmi converter but did...

Had the same issue, called the pump manufacturer and they had a bad run of pumps. the ones made in mexico are the good ones the ones made overseas are crap

I am planning on re powering my boat and going to sell my 2015 G2 250 with roughly 380 hours on it. Any ideas on what that should go for??

So for some reason my 2015 521C is burning up the Rule 800 pumps like crazy, three so far this year and a couple last year. It is both of them intermittently that are failing.. Lost one last Saturday...

Ok not sure what a hooked hull is??? Have not looked at the motor yet but he said he was running 65 on the weekend.

So my buddy just bought a 2008 Z7 with a 200 opti and a 6" plate. It has a 25 fury with no plugs and the passenger has to get up on the deck to get on plane. I went out tonight with a 24 hydromotive...

Hello Gang,
I have a 2015 521C that has a broken console, last fall I called Ranger and they said it was out of warranty but as a gesture of good will they would send me a new one. They did indeed...

Hey guys, opened the ports in the prop and it runs like a rocket out of the hole.
Thanks for the help.

I have actually not opened the ports up but will do that just to see. I also did disconnect all of the lowrance from the network but the ranger gauges did not get disconnected... I will give that a...

Hi guys, I have a 2015 G2 250 HO on a 2015 521C ranger and have some issues nobody can seem to sort out. After the boat warms up and I have run it for a while when I go to take off it wont pick up...

It appears the assembley on the tongue of my Z21 trailer is wore very bad or is failing. Is there any repair details or info anybody could share with me.
thanks

2007 Z21 ranger.
250 hpdi stock ran 69.9 with two guys full tourney load 25t1
phaseII ran 74.4 two guys full load with 25T1 put a beat up 26 I have for a spare and ran 75.2 just me with a full...

Just to be clear I just installed the fresh motor and running a 25 pitch yammi prop and the pad height is set at 4 1/2" (if I am measuring it correct) which it was at when I bought it a couple of...

I have a 2007 Z21 with a 250 hpdi with a hydro tec phase two kit. Curious if anybody is running the same rig and what prop, pad height etc is working for you. I am really happy with the way the boat...

So I am just breaking in my just rebuilt Hpdi 250 with a Hydro Tec phase 2kit. Motor has crazy bottom end and midrange, still working up to a wot run but it's already faster than the stock version....

Carlos, I am new to this site but very happy there is someone with your knowledge a keyboard away!!
new gauge worked just like you said it would. Actually had over 25 psi at speed.

So I pulled the sender units out today and the starboard tank had the keeper that holds the float down had slid all the way up the arm so it was giving a false reading. Also for anybody doing this...

Thanks Carlos I am heading to the river shortly.

Having an issue with both gauges on my 07 Z21. I pumped out all of the old fuel a couple of weeks ago and then put $25.00 in each tank to fire up my new Hydro Tec freshened HPDI and it didn't even...

So I didn't realize they had that harness. I just installed one on mine and did the cut and splice deal which was pretty simple. I hooked the water to it though and started it up in the driveway and...

Mine measures 25'8"

Thanks Jethro. I did not have the stainless cup in place, that made all the difference. How often do you guys change impellers or the entire assembly??

Thanks guys, I will go at it again tonight and let you know how I made out.

Anybody??