Probably nothing wrong with the switch. Can’t tell you how many times I have read here on BBC about those bow switches going off on their own after fishing in a hard rain, and then being fine when...
Type: Posts; User: catdude28
Probably nothing wrong with the switch. Can’t tell you how many times I have read here on BBC about those bow switches going off on their own after fishing in a hard rain, and then being fine when...
My breaker bar and torque wrench stay in the truckle of the time, with the correct sockets. I don’t see the need for my impact driver for roadside emergency.
That's how I would do it. Plastic, starboard, etc. Then I would just epoxy them in
My last Ultrex I had for five years. Only thing I had to do was to change the bushings once. First Ultrex, when it came out in 2017, I had the typical foot sensor problem initially, which MK...
My Lund Impact sits in my driveway with the cover on. It's not necessary to do all of the snaps. I do four on each side. Saves time and effort
Odyssey lists MK and DP chargers from 6 to 15 amps as approved, and some other brands. I once called them to ask why the MK PC 10 amp chargers were approved, but not their 15 amp chargers. Answer...
That is a very heavy load of electronics even without poles and livewells. I would prefer to keep my crank battery isolated so that I am sure that I am getting back to the dock. The 27 may work for...
Although I think all three are very good, I would stick with Merc. Simple reason is that I have a great relationship with a fabulous Authorized Merc Service Centre.
That would be my best guess too. Can’t see a roller scratching like that. The rollers rub, with residue cleanable with acetone, but they don’t scratch. Loading off centre, just once, each side,...
Of those 18 brands that you have listed, the only five I would consider in your situation are Ranger, Basscat, Stratos, Skeeter, and Phoenix. No need to discuss the various reasons for eliminating...
These are best for low freeboard boats like a bass boat.
Agree. In Canada, an NRX is about 1000 Canadian dollars with tax in. I can build myself nearly 3 customs, either on NFC, or Batson RX10, just as good, if not better, for 1000 dollars. The reel seat...
I'm in Canada. Had a large local tire shop put 4 brand new passenger tires on my 2015 P2 trailer. Had a another local tire shop replace a passenger tire with an identical one on my 2019 Classic...
Try pulling off your prop and putting it back on turned 180 degrees
Good video. I remember building some new bunks for my 2010 Puma. Rip the boards, taper the front, chamfer the back edge. Placement had to be absolutely perfect because the bunks just make it...
heading up
Pretty sure I've read that the bolt pattern is the same for Quest and Ultrex/ Fortrex, but the bolt holes of the Quest are a larger diameter
As long as it has a separate selectable AGM setting, it should be fine. If the wet cell and AGM setting is one and the same, I would not chance it.
I tried 3 different brands of epoxy, and finally settled on Gen 4. Right now I use 2 coats of light, but my plan going forward is like above, with one low build coat, and high build for the second.
I gave up on powder coating, baking, etc. I did not feel that the time and effort was worth it. Now I just put on two coats of nail polish.
The Duracell 31 AGM is a gamble, seeing as it only has 800 ccas, which is required just to crank your Opti. Accessories need to be accounted for, so ccas should be up around 1000. In AGM, you can...
Repeated deep discharges will shorten battery life significantly, but if this is the only time you have done so, it should not affect life span, especially with your batteries that are only a year...
If I am not mistaken, your outboard requires 800 ccas for cranking, so you should exceed that by at least 150 ccas to allow for your graphs, etc. On the least expensive side, the 31 fleet/commercial...
I fish only for fun, and have never tourney fished. Post #& said it best with “it feels like life disappears”. I have encouraged all of my kids to find something in their life to take them away from...
Our Samsung top loading washer started making a bearing noise when it was about 7-8 years old. Repair man said to trash it and buy a new one, as Samsung only sells the entire basket assembly for 400...