Looking for a LakeVü g3 Ultra LVUS106F microsd. thanks
Type: Posts; User: burgoffjd
Looking for a LakeVü g3 Ultra LVUS106F microsd. thanks
bump
bump
Looking for a starboard side mount powerpole bracket 2 inch setback 6 in rise. Thanks
still lookin...
I would appreciate it- 4135599982 feel free to shoot me text
bump
Hey Don, I've got a gentleman offering a TM1 that needs a rebuild off an early 2000s ProXB that has the funky two piece driveshaft. Would I be able to swap the driveshaft and all of the internals...
I am looking for a housing only not an entire functioning lower unit. Thanks
Thank you Don. I will look around for a replacement housing
I had an unfortunate encounter with a shoal out on the river this afternoon and took a fat chunk out of my skeg. Definitely sucks considering this was a practically brand new TM1 when I bolted it up...
Sorry, Don. 0G424081 is the serial
I helped my buddy replace the water pump on his 96 200 efi (0T424081) and when he went to run it today it wouldn't really pee for him (just a dribble), even after waiting for the motor to come up to...
Thank you, Don. Sure enough, there was a piece of wood lodged in the port thermostat preventing it from fully closing. I hope to run the motor this weekend with a fresh set of plugs and report back...
The throttle is indeed reaching 100 percent.
When the powerhead was replaced, I was told by the shop they went through the fuel system, injectors were cleaned and flowed (#6 injector was what went...
I have an 02 225 EFI (0T467078) on a 20ft gambler intimidator, blew powerhead last year and replaced with an OBR reman. Ever since the new powerhead was installed the motor will surge when applying...
Looking for an armature that will fit a 24v 82 lb motorguide tour circa 2002. Thanks!
You're the man, Don! Performed the procedure as described and was able to bleed a solid amount of air out of the helm. Easily cut the amount of play in half. I plan on going at it again later on to...
I purchased a mercury steering cylinder from Don about a year ago and installed on my 02 225 efi (0T146490). I really like the unit and feel it is a substantial improvement in design over the seastar...
Looking for a used, in good working order, entire trim assembly for an 02 225 EFI 0T146490. Thanks!
bump, ill cover shipping 100 beans
I have an old steering cylinder that I replaced with a uflex unit. Needs endcap seals replaced and new bushings to be 100 percent again. I believe it is the HC5345 model. $100 plus the ride, thanks!
Iso gen 1 torquemaster lower unit 20 in shaft 1:75 ratio for an 02 225 efi on a gambler intimidator. Text 413-559-9982 thanks
WTB a used Garmin Echomap Plus 93sv. I only need the unit, no transducer. Thanks
for sure, I would imagine running two in parallel would be necessary for most applications.... nobody has any first hand experience with em?