July 2020 and the same problem exists. Same fix still works
Type: Posts; User: Bass_Por
July 2020 and the same problem exists. Same fix still works
Thanks Mike. Compounding and wax sounds like the way to go.
Thanks. I've used magic erasers everywhere else,don't know why I never thought of that.
Calling nikesexpress, or anybody that has a white hull
I remember you posting something about an effective cleaner for the slow buildup of light stain from the river.
Of course I wipe it down...
Hi. Check out the Four Wheel Campers "Fleet" Model, or the new "project M". They are very well made, not cheap though. Lots of owners with Tundras. Full disclosure, we have a Hawk.
Awesome! Good Job fellas.
Awesome. I hear that 200 is a beast, comparable to a 225 Opti. Post some numbers for us!
I have a 2004 288, and we installed a set from bassboatseats.com (board sponsor)
https://www.bassboatseats.com/collections/fish-and-ski-boat-seats
The reupholstery guys I contacted weren't...
I dont know if you can gain access to the inside, but through-bolting might be an option, or at least going bigger/longer. I would look very carefully for rotten wood. This is a telltale sign of...
I think 6" is about the max you can generally add if you have stock mechanical cable steering.
The transom design features you refer to are really common now, because of heavier engines. Its...
Hi. I have a 288, and I added a single Talon on a Z-Lock jack plate a couple years ago.
I went with the single 12' so as to not block the ladder, but I actually think I could fit one on the...
Looks like Cobra is making Fish and Skis again
http://www.iwantacobraboat.com/bass-boats/fish-ski.html
Enjoy!
Hi, welcome to the board.
Congrats on the new boat. Vipers are sought after.
On the glass, I'm not sure I understand the issue or see it in the picture. But when we got our boat the seal had...
Chef Chad Wells!
http://www.boatus.com/magazine/2017/june/chad-wells-snakehead-fishing-chef.asp
Nice!
www.matworks.com
They actually have templates for both the Nitro 188 and 288 Sport from 2001, Order the larger of the two and it fit our 2004 perfectly.
Very nice people to deal with, and fast....
:thumb up2:
Congrats! We just put new seats and snap-in carpet in our 288 this year, I'm sure we will keep it for years to come.
Yes.
Mercury Outboards, 30 Hp and less, are made by Tohatsu in Japan. Mercury Marine builds 40, 50 and 60 horsepower outboard motors in Suzhou, China.
You're going to love it! :thumb up2:
searchtempest.com
Good luck! I know you saw my post with pics from my install bc you commented on it, so I'll just offer one word of advice: Make sure you can get to the inside of the transom where you plan to...
It will run indefinitely at wot. I was wondering if the float might stick at idle, i.e. when the fuel drains slowly, but at higher speed the float works normally ? I'm ordering a carb kit for it, ...
Fuel is fresh. Good ideas, guys. Still puzzlin over why restart is so easy and how it runs so well until it falls on its face. It's like one of those kiddie rides where you put your quarter in and...
I've got a 9.9 with a weird issue. It starts easily, runs 3 minutes or so at idle, then dies abruptly. It restarts easily and runs perfectly for another 3m or so. This problem doesn't seem to...