Figured it out.
Type: Posts; User: NIGHTIDE
Figured it out.
Excellent.
Thank you for the info.
Machine is loosing bottom on plane. Want to set the frequency to a non-chirp single frequency to see if she draws better/more consistently.
Am not seeing the menu option to make this change. Bet...
New Helix 10 gen3 SI install keeps dropping 2D/3D/SI imaging at the same time while on plane even in glass conditions. Previous Helix 10 gen 1 and a 997 machine never had issues and painted bottom...
Appreciate the help.
Put in a HDS 12 Live unit and a 3 in 1 transducer.
Previously had a LSS-2 ducer which used a 10' 9-pin-to-9-pin black extension cord. Can that be used with the new 3-in-1 ducer?
Thanks for the...
:)
That solves it.
Excellent! Really appreciated your explanation and the work-around.
So using the head unit's transducer menus, I should be able to adjust one ducer to fire either high Chirp or 200khz fixed, while having the other ducer fire Med Chirp or 83khz fixed.
This should...
So if one ducer stays Chirped and the other stays fixed, would that solve it?
Seems to be bundled this way everywhere I looked.
I had my old HDS Gen3 w/ a LSS2 & HST-WSBL. ( basically a 2 in 1 w/ 2D). Obviously no frequency generated issues.
There has to be some...
Putting in a HDS 12 Live unit and a 3 in 1 transducer.
Intend on using a HST-WSBL 83/200khz ducer as a backup 2D should the 3 in 1 fail to maintain bottom while on plane. Will plug it into this...
That is the go-to saltwater ducer that most gravitate to but soft/ie: fish target acquisition still noted as being poor.
Currently run a GT40 on this head unit to get Structure Scan to pick up fish targets.
This transducer has never cut it and is a disappointment in the imagery it provides.
What would be the...
I have a HDS 9 GEN3 and have been using a HST-WSBL for 2D.
I also ran a Humminbird Helix 10 gen 1 that I am swapping out this spring (selling it as well as a 9" backup unit) for a Helix 10 gen3...
Head unit is mounted flat on the console. No gimbal mount. Just in a precise cut out for the old 997 head unit to fit in. Typically a bezel or adaptor kit will allow the new head unit (Helix) to fit...
Have used the 997si since it came out but now wish to have the Auto Chart Live feature in my setup.
Questions:
- can the 997si machine just receive a software update for the Auto Chat feature?...
MOVED POSTING SORRY..
Very encouraging..!
On a 200hp HO I measured the oil consumption twice. Once it came out to 90:1 next time 105:1.
So the 50:1 you mentioned I think will never happen. It should be way more economical than that.
How do the Binnacle neutral safety switch wires (yellow + yellow w/ red stripe ones) get wired? And do they get 12v thru them or do they just complete a 'ground'?
Thanks for the info.
Just used the disconnecting to diagnose whether the problem was this or the shift rod/'o' ring being the problem. The shift switch will be changed before the engine is put to use again.
The shift...
Found the single black wire w/ yellow stripe. Disconnected and the engine shifted fine and did not cut out any more. http://www.bassboatcentral.com/smileys/smile.gif
Thank you for your help.
Thanks I appreciate it.
Thank you for the reply. Once I disconnect the plug as mentioned, how is it tested.??
Thanks.