Search:

1b903669 serial number.

I have a 2012 pro xs.. <1b903669> Model number1251P73ED. I was out fishing today and got 4 beeps every 2 min. but had power. Then on the way back I could only go about and idle with 4 beeps every 2...

Hey guys. I have a 2012 nitro z9 purchased this year from. Original owner. I took it out today in some rough water from pleasure boaters. When I went to load up my nose is moving up and down. What is...

Hello all. I have a new to me 12 nitro Z9. I was pulling tires and checking hubs and brakes. My question is, how loose are the calipers And brake housing supposed to be? Mine were very loose. I could...

Where is the best place to purchase a rebuild kit? Recommendation?

how difficult is it to do overall? Secondly, If the piston chambers are messed up, In my mind I can't bore them and keep the pistons the same size as before if i purchase a rebuilt kit.

Hello all,
I have a 98 Johnson j115tslecm (seriel G044B2124) that I lost power on. I compression tested the each cylinder and had 90 on two 70 on one and 0 on another. With that low of compression,...

I have a Gen 1 Helix 9 SI unit and was looking at a g3n or a g4n helix 7 for the front. Can I link them? If so What would i need?

what model transducer do I need for a trolling motor to use this?

Putting together the head after water intrusion. Anyone know the torque specs on the 4 bolts by chance? Anyone know why type of light weight grease to use on the shaft? Vasoline work?

I have an older late 90's Stratos boat with some seats that are in real badneed of recoving or replacing. I can't justify spending 400 for two new seats on a boat I might be getting rid of in the...

No tag but did call ez loader with my serial # to ask about poundage and its 3500 pound axle

Drop axle I presume then correct?

Anyone have any idea where to get a replacement axle like the one pictured? I can't find a square torsion axle with a straight drop like one pictured. Axle is fine per say but the camber has gone and...

What transducer do I need for a trolling motor on a g3n helix 10 di mega+chirp

Helix 9 si/mega g3

Swapping out old units to humminbird. Helix g3 10's. Where is the best location for the transducer? Pics or drawing over my pics would be greatly appreciated. 351113

I just purchased a new boat and swapping out to all bird units. I am needing advice on transducer location. Attached is my transom. Any advice would be appreciated. 351111351112

I have a Helix 9 SI g3 at my console and a Helix 9 GPS/Sonar in the front. Can I share GPS HS Precision Antenna between the units?

Anyone know the shimming distance for the driveshaft oil seal to the pinion gear on Johnson j115tslecm? Is it the same as Cobra's 7.511?

Okay. Dropped the lower unit and the flywheel turn free. Put spark plugs back in and even cranked it for 3 seconds and it cranked and turned over. So, looks like I will be rebuilding a lower unit in...

All four plugs look normal....doesn't look like anything came in contact with them from the motor. Guess i will drop the lower unit and see if motor turns.

J115TSLECM

Hey guys I am 99.9 percent my motor is done for. Just looking for guidance on where to start looking for new or rebuilding the old. Like stated in the title, I have a 1998 Johnson 115 SPL model . I...

I have a 98 Stratos Trail trailer and the tires have began to start wearing on the inside edge. I'm suspecting loss of camber in the axle. My question is can Camber be put back in the axle and it...