Payment sent
Type: Posts; User: Roberte
Payment sent
PM sent
Nevermind
With that boat setup you should be in the upper 30s or lower 40s, I would start by looking around at this and other sites to see what others are putting on similar boats with the same motor. Like you...
Found this on the G3 website. http://www.g3boats.com/model_comparison_chart_2012#11 It's for a 2012, but your 2009 should be the same. Hope it helps.
Eagle 180 Hull length 17' 8" Pkg length 22'...
Merry Christmas y'all!
I'm pretty sure the 10 degree dead rise was introduced in the Eagle Talon which I think came out in 2011. Before that, the Eagles had a 12 degree dead rise and HPs had a 16 degree dead rise. I've...
Found this article today and thought of this thread. It appears the 90 hp rating on the HP 170 was a 2001 only limitation, subsequent years increased the max rating for the HP 170 to 115 hp. I'm...
Use this website to help determine what prop that you want.
http://www.yamahapropselector.com/propSelector/web/
Use this website to help determine what you want.
http://www.yamahapropselector.com/propSelector/web/
Try looking up part number 703-82563-01-00 for the tilt and trim switch on the side of the motor. Boats.net had it listed for ~$62.
My apologies, I just found a link with photos of a 2001 HP 170 and the layout is reversed compared to my 2007. I hope you find a solution to your problem.
Unless your boat is configured differently than mine, I'm not sure how you are coming up with 2 rod lockers. The 2007 HP 170 I have is configured with a center rod box that has rod holders mounted on...
Yamaha motors respond well to Yamaha props. I'm running a Turbo 1 on both of my boats; a 17" on the 90 and a 19" on the 115. I would recommend that you look at either a Turbo 1 13.25 x 15" or 17" RH...
Did a quick search on this forum. One of the members on here had his 2004 hull replaced due to some cracking at the transom. Apparently 2005+ models received a revised knee brace layout to prevent...
The only thing I can think of is the clamp on style for the gunnel/railing or a seat post(s) mounting point. Several options for spider rig mounts up front if you use the seat post location. I ended...
I ended up with an "All aboard" type ladder(s) as I really liked the way it stows and I did not want to drill any more holes in my boat(s) to mount them. That being said, several folks use the type...
Umm, are you aware that G3 owned by Yamaha?
Did a little research and on NADA guides and a 2001 G3 Pro 175 w/ a 50hp 2 stroke has a low retail of $3900 and average retail of $4450. Hal is right, $6000 is overpriced for this boat. That boat's...
This boat is the predecessor of the Eagle 165/175/185 series of boats. These are good entry level boats that provide decent stability, ride, and performance for the money. Unfortunately, I would...
I've had all of the panels off of my Eagle 170; a little challenging but certainly not impossible. If the construction 170 is the same on the 175, a combination of wooden decks and aluminum lids,...
Sorry about the double post, not sure what happened when I edited it.
I have both boats but in the 170 flavor. The HP is a wider boat 90" beam vs 85" and 4" longer 18'-0" vs 17'-8". As you have already stated, the two have different hulls, the HP is a pad hull and the...
I have both boats but in the 170 flavor. The HP is a wider boat 90" beam vs 85" and 4" longer 18'-0" vs 17'-8". As you have already stated, the two have different hulls, the HP is a pad hull and the...
Congrats! Post some pics when you can.