Like Jones is eluding to, a blown fuse is due to high current draw. High current draw is caused by a short, or excessive resistance. Assuming a wire didn't rub through causing a short (unlikely),...
Type: Posts; User: 1911Shootist
Like Jones is eluding to, a blown fuse is due to high current draw. High current draw is caused by a short, or excessive resistance. Assuming a wire didn't rub through causing a short (unlikely),...
If you're shooting at any steel targets (including rifle rated & AR500), do not use XM193 or XM855. Both will damage the steel at <100 yards, and the steel core XM855 may even poke a hole through...
It looks like he installed a cover plate over his trolling motor tray. Some of the tray manufacturers make them, but I didn't see one on the EZ Troll website, so you'll likely have to fab your own....
The manual for the charger should indicate what the blinking LED means (i.e. can't see the battery due to a wiring issue, voltage hi or low, charger fault, etc).
Thanks for the heads ups John & Bill.
This is a stop gap motor to get me by until I plunk down for a Terrova. I'll be sure to reinforce the connection. I didn't cut the heat shrink off the...
Hey all, first post, so I thought I could put something useful out there.
I recently picked up a used 2004 Minn Kota Maxxum 74lb 24v bow mount trolling motor. It was advertised with the symptom...
